Chosen Solution
Trying to finish a screen replacement, I bought the iFixit adhesive strips. The two large strips make sense so me, but the smaller piece with the blue backing is a little puzzling. The long strip would seem so fit at the iPad edge between the two antenna breaks, and the bottom pieces appear to have some place to go, but the inner sides would appear to float on either side of the camera. Did I throw out even more parts I still needed than I already figured out with the old screen? Thank you.
There are two U-shaped antenna brackets on the top of the wifi model. I’m guessing these brackets don’t exist on the cellular model, therefore they land on empty space.
Best off just pairing up with what you already have, and see where it fits. Some cutouts are cut out to fit the frame first, some go on the glass. From experience, anything other than tesa tape just doesn’t work well. Best off buying premium digitisers with tesa tape, and then use primer on the frame. Less hassle messing around with cutouts. If you have no other strips left, try and put your own in where it’s missing. If it helps, I have a video of keeping the glass down really well and works everytime! https://youtu.be/u5ZSSyGz98I Hope that helps.
