Chosen Solution
I purchased and just installed this on my phone. My understanding is that it came with a camera and earpiece, but neither components are working. My understanding also was that it would also fix the screen, but 1/2 of my screen is still black. The only thing so far that it’s fixed is my screen is no longer cracked. Please tell me what’s going on with this. Thank you
Digitizor needs changed,
@logansangel4evr you are probably trying to fix what seems to be a board problem by replacing the screen. At least for the half-dark screen. Other possibilities: you are not seating the connector in place properly, or the back-light pins on the replacement screens are uncovered and touching the frame. As for the camera, I would think either the replacement camera cable is bad, or you damaged it during replacement, or the issue is also on the board like for the half-dark screen. To help you determine the causes and possible solution, you need to share some history about your iPhone: liquid damaged? Previous repair attempt? Chronologically please.
The screens that get shipped out generally dont have speakers/sensors/home buttons. You will need to transfer these from the damaged screen. The issue with the black portion of your screen may be due to the connecter on the board. Inspect where you disconnect the flex cables and be sure they are fully pushed in. The 6s has a long connector on the top portion and can often take a couple tries to get on correctly Be sure to disconnect and drain the board by pressing/holding the on/off button with the battery disconnected best of luck, Eric
