Chosen Solution

I recently dropped my smok mag 225 and busted the glass on the tank… After replacing the glass i screwed the tank back on and it asked me new coil or old coil… I selected old coil and the ohms read 41…but when i pulled the trigger to hit it the screen said atomizer short… I put a new coil in and same thing… It reads the ohms of the coil but now says no atomizer… What is the problem? Thanx for reading….

I also have the smok mag and it has been Doing the same thing the glass broke so i changed the glass and atomizer next thing I know it won’t work I pout the tank on my other mod and it worked fine so i toke the top off the mag and saw that they poorly saudered one of the wires I toke it the rest of the way apart and saudered it my self and it works like a champ also becarefull pouting the clip back in or playing with it to much because it wares down really fast and won’t stay closed for long

I don’t know if u have tried this yet but I know with the smok products the connections can be touchy. So if you unscrew the mod make sure your connections are clean and check if the pin inside the mod still springs up it should push up against the tank

This just happened to me, so I took the top part off and the cord that connects the batteries to the atomizer was snapped in half (looks like it was put together wrong) maybe that is your problem.

So how do we get the mag body to split? I cannot get the battery release screw to move either direction.

My boyfriend’s mod stopped working (the screen) and now when we turn it on you can’t see anything on the screen does anyone know where I can take it in to get the screen fixed (in Texas) or what I can do to fix it

I had to find a dead one online and hope the screen worked… luckily it did and I was able to replace it

I dropped my mag it’s reading no atomize. How can I fix it?

Its the saudering you have take it apart and reader the white back in place that only $@$*!& part of smok they never use enough

@ Jacob benson go to the bottom of my post and read that part for a quick answer. Great topic. This is just what I needed to know! I dropped mine and it happened to fall right dead straight on the top of the atomizer and I happened to have an old mod, the tank worked still in-fact still works to this day, anyways the mag itself wouldn’t read any tank I put on it. It would read no atomizer for a while then after pulling it out months later it started reading random oHm’s like 3.4* 5.2* 1.6* all on the same atomizer. I took the thing apart just now after about a year of it being retired and the sotter (sorry my spelling is poor) is still intact from what it looks like. There seemed to be a little bit of corrosion around the top piece but I’m sure that’s just age it wasn’t bad. The only fix I could think of is trying to mess with the pin, and if that doesn’t work take the whole thing apart to re-sotter the wires. P.S. the screw on the battery release button does come off like any other screw counter clockwise. However when I took mine out it had Lock-Tite ;also known as liquid anchor; on it (the blue or red stuff that you put on screws so they don’t come out with vibration or usage.

I also dropped my smoke may an broke the glass so I got a new atomiser, it reads no atomized when connected so I tried it on my other smoke an it said the same whereas my other atomized is fine on both…. Seems like it’s the atomized not the smoke that the problem lies with. Anybody got a fix for this please. Thank you so much in anticipation of a resolve.

been through that.. just star at a low wattage. soon it will recognize ur coil resistance.. it happened when i clean my atomizer then after reinstalling it i suddenly hot “ new" instead of the old resistance reading.. after lowering the wattage i start increasing it.

So Ive been having a problem with my mine. the trigger wont fire? It doesnt seem stuck. I cant get a full pull off of it but for 2 secs. After pushing/holding down on it this way and that. Please Help!

The same thing happened to me and when i shook it it made a sound and i took it apart a little chio in it that reads R60 1736 fell out it was glued on. I sent in for a replacement and they said i had to pay for it so now im just looking for electrical glue east fix

Hi thanx but which bit did you shake an take apart, Battery pack or Atomiser please?

I had a different problem the pigs aka cops of tombs count poored my tanks content directly into my mag after they took the plate off where the tank screws on at &&^&^$^ the whole mod up do not let the pigs touch your stuff or they will destroy it