Chosen Solution
Hi, I have a Humax HD-FOX T2 Set Top Box for recording and playing of TV and Radio media. The RF OUT has failed so that the box can no longer transfer the TV signal to the TV. I had a look inside and found that the RF OUT and RF IN are packaged up in a module. I wish to replace this. Do you have a guide or any information to help me with this? Thank you. Eric
Hi, The set top box has the channel information and you then use the box’s remote control to select which channel you want to watch etc. The TV input has to be changed to HDMI (if that is how it is connected) and you don’t use the TV’s remote control except to turn the TV on or off and to adjust the volume, although you can use the Vol. control on the box’s remote as well. You can even use the box’s remote control to operate the TV if your TV model is supported, check the user manual - link below Basically the TV is a slave of the box. Everything is done by it as to what you watch, live TV or recorded TV or even time shifted TV. Here’s a link to the user guide Click on the Support link below the image of the set top box and then download the user manual to find out how to setup the box. It has a setup wizard that will walk you through the steps. Just ensure that the box is connected to the TV via a HDMI cable, turn on the TV and change the TV’s signal input option (press the input button on the TV remote, use the arrow keys) to select the HDMI port that the cable is connected to in the TV.
