Chosen Solution Hi guys quick question ive been looking on YouTube about the WiFi chip on the 6s plus. Some show the chip needs to be programmed and some doesn’t show it. My issue is the WiFi isn’t working. The repair guy also mentioned about programming. Just wanted to know if that had to be done. Thanks
Chosen Solution Hi, I want to replace my primary HDD with an SSD. So I don’t want to replace my optical drive and I don’t want to add the SSD as a secondary drive. I am searching for the best option with a hardware thermal sensor adaptor/cable or a similar preferred and established solution for the iMac Intel 21.5" EMC 2389 mid 2010. So which parts (thermal sensor adaptor + 3....
Chosen Solution Is it possible to take a good LCD screen from a first generation ipad and use it to replace a cracked screen on an ipad 2? Hi, for the question you are asking, if you can use the iPad 1 LCD for your iPad 2 or even the other way around, you will be disappointed. The LCD between the iPad 1 and iPad 2 are different and will not work....
Chosen Solution Hello, I replaced my battery and charging port on my iPhone 7, this is the 4th battery repair I have done and the second time I have changed the charging port as the first time I tried to install the charging port and it didn’t fit. I am not sure what went wrong with this repair but when I turn on the phone everything works but I get a message saying Unable to activate Touch ID on this iphone....
Chosen Solution I had a pink screen, narrowed down to the ribbon cable. So I purchased a replacement screen from ifixit and I just finished installing it. I turned my machine on and the screen is working, but the backlight is flickering. Please don’t tell me I have the same “flex-gate” issue with the monitor I just purchased from you guys. Any suggestions? Contact the store for a replacement Contact iFixit Customer Support
Chosen Solution Hi I accidentally damaged my speaker mesh on my phone and i wanted to look into replacing it, I can’t see any videos specifically made for replacing the mesh only the speaker itself. Is it possible or is it a risky thing to attempt to change? I have bought a new adhesive mesh strip for the phone but just wanted to check before I open it up to have a go....
Chosen Solution bottom mic wasnt working… changed the charging port flex and mic worked fine but started to restart every 3min… decided to go back to original charging port but still restarting… sometimes after 3-4times it restarted face id doesnt want to work but after a restart by myself works fine Duane is right. The charging port you brought is defective. The mic might work but you need the thermal sensors to communicate with the CPU and they obviously are not....
Chosen Solution Hello all, I have a Canon AE-1 Program and the little screw attaching the rewind knob (gray bit) to its base (black bit) mysteriously fell out and I was wondering if anyone knows the size of the screw and/or a website I can find a replacement screw for it. Thank you! Here’s the needed part Canon AE-1 Program AL-1 Rewind Knob - Genuine Canon Part You might be able to find the screw alone but its a custom part and a left hand thread to boot!...
Chosen Solution SteelSeries Apex Pro Some of the keys seem to have RGB problems, some only turn Red, some only turn Blue and when not those colors the light is just off. Is there a way to repair this problem, or is it time for a new keyboard? reset keyboard settings .. if not fixed -> replace leds is R+BG type, here u can buy it 10pcs Mechanical keyboard light RGB LED 4pin RBG lamp full-color Here is how to
Chosen Solution Not sure what happened, probably dropped it the screen started to show these spots in all the screen all the functions of the phone works when i take a pic in my mobile and send it across it has those spots on the picture too. I have replaced the screen too but that problem still persists. Any clue what i should do ? Also when i was trying to replace the screen i noticed some kind of dried liquid on the battery and the back of my old screen panel....
Chosen Solution I turn device on by the down volume button and the power button but whenever it gets to the red Verizon screen it just stays there. maybe ur software got removed get a new software by visiting a tech shop it doesnt cost more than like 5$.if its not the problem then check by voltmeter that your battery is giving power or not if it is giving power then there can be a display problem maybe it boots up but display doesnt work....
Chosen Solution I have an old 2009 iMac 3.06 GHz that started to show signs of dying. The GPU is toast, it’s running slow (already installed 8GB of RAM) and runs hot. Since the GPU is toast, turning it on would require 9 restarts before the LCD would come to life, and despite having lots of free space and just a few startup apps, it’s slow as mud. My dad wanted to ditch the old iMac and buy a new one (hopefully not the Pro), however I wanted to give a shot at making it run as new....
Chosen Solution Samsung galaxy note II. I had a problem with the charge port and replaced it. Now the unit charges but it will work for a couple minutes but then will all of a sudden lose the SIM card and drop connection. It also is having trouble seeing the battery voltage, it will go from 98% to cutting off from low voltage. When I plug it back in it shows the 98% charge level....
Chosen Solution I have done several motherboard repairs, but always have problem when i repair the backlight. What I have heard you can change both BL Ic, Diod and coil to make sure all parts are good. Question is what is a safe working temperature for removing them and then install new ones? On the ones i have tried I always have problem to remove the coil. In what order do you install them?...
Chosen Solution Is it possible to add a hard drive to my laptop? I would like to know before opening it up. No. hp pavilion 15z-eh000 laptop has no room for hdd but it can however can be upgraded with nvme ssd but it has only one slot so you might have to backup everything you have on you’re laptop, upgrade it and back it up again which will leave you with typical nvme ssd that has no purpose which you could sell it online and other thing you can upgrade is ram but you can only upgrade one slot of the laptop so you either gonna stuck with 12gb or 20gb of ram which won’t be running on dual channel so it would be slower but again runnable I guess...
Chosen Solution Basically i removed my screen and before i screw everything back i checked if the screen is working and it did worked. Then i screwed everything back and i tried to turn it on and i get nothing . i plugged it to my pc and it’s shows my phone in iTunes and it’s charging. I have no sound and vibration. Please help me what should i do and sorry for my bad English ....
Chosen Solution I spilled a bit of water onto my keyboard a little less than a year ago. After the incident I flipped over the Mac and let it dry for a week or so. Everything worked except for the battery. My Mac simply will never turn on unless the charger is connected to it. If the charger falls out, the Mac shuts off. Now I’ve managed to work like this for so long, but my other problem is the battery does not actually recharge, so its been going from 100% and gradually dropping....
Chosen Solution The PC keeps turning off and turning back on without going to the start-up screen. It shows the hp logo and then shuts down to black and turns on again, hp logo, then back down. This happened when I tried to update from Windows 8 as this is a hand-me-down from a friend and was deleting files to make room. I do not believe I deleted anything of value just old word documents and apps like Twitter....
Chosen Solution I’m changing the drive belt on my late model DR Brush mower which has Briggs & Stratton 16.5 hp engine. To remove the belt from the engine requires the removal of the electric clutch pack from the engine crank. No biggie and quite a normal operation, but when I went to put the clutch pack bolt back into the threaded crank end, there was this small shaft protruding....
Chosen Solution Can’t find a guide on how to fix my tv it suddenly went black in the middle of a show that had a colorful scene and then cut off during a cliff hanger, thought it was part of the show but it never turned back on, tried to turn on/off, un plug let it rest & tried to search for the issue but without success any advice? Will post pictures of tv opened up....
