Posts

Chosen Solution Hello, I recently replaced the rear camera on my iphone X with no success. When I open up the camera app all I get is a black screen. When I reinstall the old camera I had the camera boots ups and works with the camera app (although blurry due to damage). Any ideas what might be going on. Also the flashlight doesnt work with either camera. I have attempted soft reset and changing some setting in the camera setting with no success....

Chosen Solution I have never worked on or am familiar with BLU devices, but I always tell my clients.. any time you make videos or take pictures that are important to you…backup backup backup. If you have nothing to automatically sync those files…Do backups manually via bluetooth or by USB. If these pictures are really important, I would take it to someone who does component level repairs and see if the board can be fixed....

Chosen Solution The computer completely lacks the capacity of updating the OS. Hence, I need to upgrade the hard disk. I checked that this machine has a soldered hard drive (eMMC). Does anybody has the exact location and if there is any other possibility of upgrading the hard drive without soldering the new one? Hi @greatpunit Replacing eMMC flash memory may be difficult. The manual shows that the laptop has a micro SD card slot so perhaps a quicker, easier and cheaper option to consider rather than replacing the storage memory or even the motherboard (see Item #11 on p....

Chosen Solution Hi, my iPhone4 has entered a failure mode since the batts went to zero mid call. It’s now in a restore loop - apple logo only then reboot cycle - (BUT only when powered by a pc usb). When powered by an Apple charger the normal boot up occures and completes with the iTunes restore sync picture. It will not turn on at all on batteries alone. Apple and I have checked the battery, its fine and sitting charged at 3....

Chosen Solution I replaced my huawei p9 broken touch screen with a new one and since then, everything has been working normal except that it doesn’t recognize my knuckle gestures anymore. It sees my knuckle as a finger touch instead. I have checked the gesture settings and everything is active. What can be the problem? It may be the sensitivity on the screen due to the new screen. Try using a different combo of gestures....

Chosen Solution Hi I dropped my Samsung Galaxy Tab S2. It does not look damaged but the screen does not respond at all. What should i do? Thanks for your help. ^_____^ Have you rebooted it? Hold in all the buttons at the same time until it turns off, keep holding until you see the logo and then let go.

Chosen Solution it wants the current password that i don’t have, ive tried to use an external hard-drive thru usb port…no success. tried to swapout the internal hard-drive…no success. Try this : Turn off and unplug the laptop from power Remove the battery Open the smallest door on the bottom of the computer with a #1 Phillips screw driver Look for two small metal contacts labeled RTC(RST). Using a flat head screw driver, touch both contacts at the same time for 30 seconds....

Chosen Solution Has anyone else had this problem? If I’m on a call, my ear or face pushes random buttons, mutes call, tries to video call or calls another person ect. … it’s super annoying. I took off the screen protector and the case and tried it for a couple of days still didn’t help. I have the sensitivity turned up.. I’m 10 days over my 14 day return period for Verizon and dont know what to do....

Chosen Solution I had psp not working for almost 8 years now already. If i remember it i was installing something like chickhen or pandora (which i forgot) to make it possible have a free games working using memory stick. The problem was after the fail installation the psp wont open anymore and it will only light up the led but the screen is black. Anyone know what to fix in here?...

Chosen Solution My camera just kept in my drawer for quite longer after using it. When i have to used it again in one occasion, the shutter released was stock. i have tried some cleaning, and checking the shutter release but it does’nt helped me. I need some advice from anybody regarding my problem. I had a D40X with the same problem. Nikon were not interested even though it was just a month out of warranty....

Chosen Solution So I replaced an LCD and front assembly. I just trying to see if all works before I put it together 100%. Does the reflective/ mirror tape have to be attached for the touch screen to work? without the mirror behind the LCD when you turn the iPod on you will be able to see through the screen to the backing plate of iPod..not always a clean result. touch screen should still work though....

Chosen Solution Hi, I think i did everything right but now i cannot initialize the SSD not formatted and I receive a “Unable to write to the last block of the device” error when i try to create a new partition. Screenshots / Pictures : https://www.dropbox.com/sh/12fcg738jzuxr… Any idea here ? Best Alex Alex - Do you have a universal adapter cable or external case to put the SSD into? See if it can be for formatted externally....

Chosen Solution Hi The shop has feet and screw sets, but not appropriate for my MacBook. Any suggestions? Thanks Here’s how to do it and the correct feet: MacBook and MacBook Pro Unibody Plastic Feet MacBook Pro 15" Unibody Mid 2009 Feet Replacement

Chosen Solution Car won’t start. Turn the key and the dash lights up, but both the park light and drive light r on. The car is in park. It will however come out of park n change gear but will not turn over- @meganmk1 , Megan, If shift indicator is showing in Park and Drive at the same time, set the park brake and try starting car with shifter in neutral position....

Chosen Solution When a.c. is on it will only come out the def or floor that it other that that it works fine Hi Robbydanny, that problem happens when there is an issue with the vacuum system. I would suggest popping the hood and looking at the vacuum lines for any cracks or leaks. Replace the lines that are damaged and if you can, swap out the hard plastic lines for flexible rubber vacuum rated hose....

Chosen Solution when you place a disc in the console it will reconise the game/dvd but when it trys to lanch the game/dvd it displays the error code 80010017. i have tryed restoring file system, and quick format, currently undergoing a full format. any ideas? chris pitchford, there are firmware issues connected with the error code and I believe that some users have had luck with reactivation. Go into into Account Management ([Friends] [Account Management]), de-activated and then re-activate again....

Chosen Solution Hey, So the main problem with the psp is that the R button is held down permanently. Not physically as the button can be pressed and it releases but when I switch off the console and switch it back on the configuration settings pop up which happens when you hold down the R button at the booting screen. Any advice? Thanks Manny Maybe, try to change the flex cable, responding for R trigger, if it is not a physical problem?...

Chosen Solution I want to upgrade my mac’s ram and io. Can I replace the logic board with later version like 2017 macbook air 11? You can’t upgrade the board to a 2017 in that machine. Unfortunately just about everything is soldered to the board in your model and would cost more to upgrade, if it’s possible, compared to just buying a used upgraded version of what you already have....

Chosen Solution The device keeps making a rattling noise, how can I get this to stop? There two main causes for the rattling noises heard in the Motorola Moto G 2nd Gen are loose buttons and poor quality vibration motors. To lower the effect of the rattling, some temporary solutions are to turn off vibration, or get a case that should reduce the noise. If the cause is a loose button, then open up the back cover and place a piece of paper or tape in the area between the button and back cover....

Chosen Solution Hi guys. I wanna know what kind of product should I use in order to remove the corrosion/oxide from the PCB membrane of a Apple Keyboard (1255). Here’s a photo to show you the status of the piece. I live in Chile (south america), so I need an advice based on “woldwide” products. Thanks! when ever i clean my keyboards i use alcohol. just so that it can dry quickly and wont have you waiting for ever....