Chosen Solution I went to start up my Samsung N130 Netbook a few days ago and on it starting up there were 3 bleeps leading to nothing…. Nothing shows up on screen at all, the machine is running as i can here the fan etc. i have checked harddrive and am going to check the ram. Any other suggestions as to what it could be? Or anyone who has had same problem?...
Chosen Solution My television went almost entirely black screen on me after a power surge. The standby light is still on, and if i take the power connect out, sometimes the image comes up to connect it. The “Samsung TV” will also show for about 2 seconds, but no other images. About 2/3 of the screen has a blue glow, briefly also. I have the back cover off, and there are no obviously blown capacitors....
Chosen Solution My iPad haven’t fallen or done any repair before. My iPad just went blackout if I turn it off for couple minutes. The sound and touch are still responsive. I have to keep making the screen on so it won’t blackout. Is this a common issue ? How can I fix it? What do you mean by you ‘“keep having to make the screen on so it won’t black out”?...
Chosen Solution The screen on my iPhone XS Max has the following symptoms recently: Touch screen is half responsive, which means sometimes fully responsive, but some times not responsive.image “shaking” or flicker, some times, not always. here is the history of the phone, screen was damaged last December, so, I have it replaced in Jan. this year, (I have it replaced with the aftermarket part, not the OEM one from Apple)....
Chosen Solution Screen goes black and unable to wake until call has ended after screen replacement the auto brightness work perfectly thou Did this happen from no where or after drop / any part replaced? have you cleaned the upper part of the screen? it is two diffrent sensors on same flex cable for the auto brightness and to shut down the screen when in a call. if something is above that sensor or screen is replaced and its not enught light in to that sensor it will go black at once and stop when the call ends....
Chosen Solution hello i was wondering if you could help me, i sold a iPhone 6 about a week ago on ebay and now the buyer wants to return the phone saying it no longer powers on, I’ve checked the feedback and it shows he’s brought a few main boards for the iPhone 6 before hand how do i check the main board is the correct one for the phone if apple haven’t included a serial number on the main board and the phone is completely dead?...
Chosen Solution Having trouble with the sleep/wake button on the side of my iPhone 7 Plus after a drop and some water damage that appears to have completely healed over time, with the exception of the sleep/wake button not working. Does anyone have first hand knowledge of the button construction or possibly which assembly the replacement part would come with? I’m assuming it’s a simple contact switch with some slight spring action....
Chosen Solution I have a yellow vertical line on the left side of tablet screen it appears and disappears i never dropped it (samsung tab A 10.1) and i just got it (its been exactly 7 days) and if i don’t fix it will it get worse, if it can get worse, how? per example will the screen turn black or maybe the touchscreen won’t work? Because that line appears and disappears please help!...
Chosen Solution I have a top load, direct drive washer. The water fills, spins, drains without issue. The problem lies somewhere with the agitator. Normally the top part of agitator spins clockwise, then the bottom part spins partly counter-clockwise to agitate the clothes. It is only spinning clockwise. I have completely taken apart the agitator and nothing seems broken (dog tabs, agitator teeth, drive shaft splines, etc). I also double checked the motor coupling and that seemed fine....
Chosen Solution Some wine was spilled over the keyboard, after few seconds stopped working. Disassembled, major spill was inside the keyboard. Removed the mobo and cleaned the affected parts near the battery and the dc magsafe board. Assembled everything back, no luck. After removing the battery, the computer will work normally but still no keyboard. If I place the battery back it won’t start. If I press the battery level button, the battery shows fully charge, and if I plug the magsafe connector will always be green (doesn’t change to orange)....
Chosen Solution My Canon Pixma MP280 Printer won’t turn alarm light and E03 message off (E03 is a paper jam, but there is nothing jamming the feed). Scanning won’t work either So far, I have: turned printer off and on restarted computer and printer turned off printer, moved print heads to the left, turned on re-installed the printer software used this detailed suggestion from Jayeff on Jan 10: Turn off the printer ....
Chosen Solution I have the same problem with my Power Shot A620, 7.1 MP, s/n is: 0926105205. . No LCD. Camera works fine through view finder. The CMOS battery measured good. Not sure what PCB view was shown on this post but my schematic looks nothing like that. Could find no fuses. Any idea what replacing the LCD would cost? Probably cheaper to buy a new small camera . Is that the view of the PCB on the LCD or is it from the camera body?...
Chosen Solution On my 2005 Durango when I change an engine sensor the ECM must be “reset’ so it will forget the data it collected while the faulty sensor was installed. How can I reset this myself? Steve, since you are talking an engine sensor, you will have to reset the PCM (power control module). You need to disconnect the neg battery cable and turn the ignition to the ON position, hold it for 10 seconds and then hook the battery back up....
Chosen Solution hi. my galaxy a5 freezes up for almost 10 seconds after i press the home button to unlock my phone.it’s really bothering me. please help Hello Adel, According to your sounds fault may coming from your launcher and its stop working, if you have nearly install any launcher remove it and check if fault remain same Backup all data in the device and reset device to factory default
Chosen Solution Where can I get a screw kit? I have seen full kits on eBay, what screws are you trying to replace, some of the screws can be found in other mac computer’s of the same era, especially the laptops, the CPU/Heatsink mounting screws are uncommon outside of eBay. Check ebay on phantom vision plus shell replacement kit where does the 1.6*6.0 screws go where does screws 1.6*6.0 go in shell replacement on phantom vision 2 plus
Chosen Solution why cant i get my a/c to blow cold air i have charged it and it is holding it good my fan is coming on for the cooling there is no leaks anywhere and neither of my lines coming is getting cold nor is showing moisture can you tell me my problem i think its my compressor Is your compressor running if not check the relays and see if you have power....
Chosen Solution does anyone have an apple gsx account that can help me figure out how to get an account Hello, To have a GSX account you must be: Apple employee Be certified Apple technician and register your certifications Ask someone with a GSX account to register you as Manager or Admin on the account.
Chosen Solution after repair i cant get i tunes to repair ios keeps displaying connect itunes This is probably going to be a hardware defect, but we need more details to know if this is solvable or not. I see a lot of iPhone 5 classic battery replacement pry damage–which is board damage to the edge of the board behind the SIM tray from trying to pry out the battery. This damage results in a loss of function of the home and power buttons, and sometimes it will cause the phone to boot in recovery mode—this can be solved....
