Posts

Chosen Solution My Apple Pay is not working on my iPhone 7 Plus, and after all hard resetting of the device and all the cancelling and adding of my cards on Apple Pay, this issue seems to remain present. Hence I am wondering if the it is the NFC antenna or IC controller in my phone which has failed. If so be either one is the problem, can it be repaired and would someone have a link to purchase the parts needed to repair the issue as I am unable to find any replacement NFC parts for this iPhone model online....

Chosen Solution I have a MBP A1226 (2.4 GHz (Santa Rosa) MacBook Pro 15") with a bad Logic board and another MBP A1150 (2.16 GHz (Core Duo) MacBook Pro 15") That works fine but the screen is cracked. Could I possibly put the good logic board from A1150 into A1226? I’m pretty sure you can as long as they are the same year model. It would probably be easier to swap the displays though....

Chosen Solution My iPhone ended up on the street and was run over by several cars. Thanks to my otter box, the case was untouched, but the screen was completely busted. I replaced the screen, but the phone still won’t turn on. What are some other things to check? Should I replace the battery or the logic board? Try a battery as it could be dead and as for changing the logicboard only way til do that is to buy another 5c and take it’s motherboard ....

Chosen Solution Hi All! I have a Samsung LN37A550P3F and as of recently, it has been having a hard time powering on. It goes through multiple power cycles with an odd looking pixelated screen between power cycles before it turns on successfully. It sometimes has loud screeching sounds coming out of the speaker too. I have attached a video of the power up here. Any advice on what part I may need to order and replace would be helpful!...

Chosen Solution Hi, First of all my printer does not have a paper jam . During a months printer is showing that message and after retry several times I printed. But Now all the time, printer is showing that message. it starts the process and when it’s going to take the paper, printer shows that message. Thanks You don’t have to buy anything, the visible rubber of a solenoid doesn’t age properly and gets too thin....

Chosen Solution Hi I have Samsung Smart TV UA43KU7000K. After the warranty been expired I had Backlight Circles spots as in the attached photo. Can you please inform the solution, shall I change the led strips and which model of led strips shall I use? I have opened the TV and the leds where in their places Thank you Regards HADI RAWAL Update (01/08/2020) It is a wave in the paper reflector....

Chosen Solution When I receive a photo and want to send it to a computer, it sends it as a text file. How do I fix that? Not sure how or why it would do that or how you’re going about sending them. If I were wanting to transfer photos from my phone to my computer I would just connect it via USB and transfer them over. If you’re trying to send it to someone else, I would just send them via email and they’d be able to retrieve them from there on their computer....

Chosen Solution My PowerBook model meets this description (it is a 1.5Ghz, purchased new in June 2005), but the model # is M9691LL/A. Can someone look at this Step #15 on the iFixit site and tell me the lengths of the two screws circled in red? Should both screws be of the same length and fit flush with the inside edge of the case - or does one actually protrude INTO the battery bay?...

Chosen Solution i recently bought an ipad 4th gen (A1458) second hand and noticed the screen had been replaced. i should have checked it thoroughly but didnt since it was a steal. when i got home i noticed sleep/wake didnt function like it supposed to but if i hold the power button i can still turn it off and the most weird thing i cant install any apps on to it i can live without the sleep/wake issue but why cant i install any apps i just get the loop as if to download but nothing happens....

Chosen Solution Replaced a dead HDD with an SSD, using iFixit-tools with the wheel to open. Everything went fine, have done a few of these before. Just as Im about to power down and put the new adhesive strips on I notice a black dot/spot/speck in the middle of the screen. Its not at the pixel layer, it moves around when changing angles and is a few mm behind the pixels/display....

Chosen Solution I recently found my 3DS after I losing it in the house somewhere for a while. I tried booting it up with the SD card inserted into the 3SD and it downright refused to show anything on the screen, no sound, nothing. I tried booting up the 3SD without the SD card inserted and it booted perfectly fine as I have Luma CFW installed to the CTRNAND via the Boot9Strap method....

Chosen Solution I recently dug out an old iMac with the intention of upgrading it for my little sister to play with. It was working fine before going into storage (plain old store room, nothing hot or humid) a couple years ago. This morning I dusted it off and took it apart to install an SSD and add more RAM, but forgot to test it before opening it up. Right now it won’t start....

Chosen Solution I have a tv that we are trying so hard to fix. We refuse to let it go unless we really have to. We have a panasonic tc-p65st30 and from one day to another the tv has a 8blink error. We have replaced the SS board and the Main board.( I think thats what they are called). Even replacing both boards we still keep getting the 8 blink error code....

Chosen Solution what is the actual name of my zte n817? The name for this phone is the ZTE Quest. If you do a search for the model number on iFixit another user confirms that case as well. It is post 283607. It confirms the name and model number as well. A search for a screen protector also confirms the name on Sears.com

Chosen Solution Hello, after a fall my mac is running super super super slow and the fan is in high speed and really loud. I already opened the mac, the fan is clean. I also tried to reboot it and settle MAC OS X LION, after 24hours of instal at 99% the mac says it is not possible to download the complementary component for the install of MAC OS X. I also tried to change the harddrive Do you have any idea ?...

Chosen Solution Hi- I purchased an iPhone 6 Plus battery from ifixit, with tools and did the replacement today. I followed the instructions on YouTube from ifixit. After putting the new battery in I started up the phone before closing the thing up to see that everything was working- and it looked like it did! Apple logo- then lock screen. Looks good! Then I go to turn it off - oh no - the touch screen doesn’t work!...

Chosen Solution Okay guys and gals, I’ve got a tough one for y’all. I’ve tried every possible solution I can think of. Usually i can rely on my prior knowledge or google to provide me with an answer but I’m stuck. I’m the lead device repair technician at my local batteries plus bulbs. I say that to address that I am experienced in fixing all models of iPhones and have not had this issue with any iPhone 7 or 7 Plus....

Chosen Solution The Ifixit-Replacement-Touchscreen of my iPhone 6 does not accept any touch input after upgrading to iOS 11. When I downgrade to iOS 10 it works fine again. What’s the deal? Edit by benjamen50: Note that if you upgrade to iOS 11 with an original screen then switch to aftermarket it should work fine after that for touch screen issue. We have seen similar issues in the past with aftermarket screens not playing nice with phones during the updating process....

Chosen Solution Hello everyone, I own a MacBook 13" Aluminum Late 2008, yeah its still working fine except for I had to replace the MagSafe power adapter twice due the rubber wires as you all know the issue and once replaced the battery, and also had to replaced the main screen. Apart from that my 2008 MacBook is working pretty fine so far (almost 10 years now). OK, so heres the issue, at the back side of the MacBook where the screen is hinged to the lower base theres a black plastic protection....

Chosen Solution My late 2013 MacBook Pro 15" Retina MacBook Pro the screen flickers slightly, then 5 seconds later, the computer shuts down. It happens 10-15 ’s a day and makes it nearly impossible for me to work. The worst part is, the issue started happening after my warranty expired. Sucks! I have reset the SMC, run Apple Hardware Test, and clean reinstalled Sierra 10.12.2 and it still happens. I also have Coconut Battery installed and Battery is good, as well as, SMC Fan control....