Chosen Solution I have a 1/2” scratch on my TCL 40” LED television. It shows white when tv is on. Is there a fix for this? I have tried the Vaseline and the art eraser “fix” with no luck. tkbaldwin what you describe “It shows white when tv is on “ sounds actually more like a bad LCD. Either way, there is no fix for it. You would have to replace the screen to eliminate it....
Chosen Solution Hello everyone, I just replaced the LCD for iPhone 7 Plus and tested. When I turned on, the screen (right bottom side) got dark…what are the potential reasons for this…? i don’t think I damaged any parts while replacing and I have never had this issue before while working on other phones. Just in case, I used an extra LCD screen for this but the result was the same…so I don’t think it’s because of the bad lcd screen… thank you for your time!...
Chosen Solution My iphone 3gs was dropped in water by my little son. I took it and used water damage therapy by keeping it in air tight rice for one week. After that everything is ok but screen is black. when i press power button it blinks for a while and then goes black again. Sometimes the screen is OK for one or two days and after that it goes black again....
Chosen Solution Hello, When I boot up my iPhone 5C, everything appears OK. I see the little white Apple logo. About 2 seconds after my home screen appears, the screen goes black. I have tried a new battery and a new screen, but the issue remains. I believe the phone is actually powered up. If I open iTunes, it waiting for me to enter my password. Try doing a soft reset and see if that helps....
Chosen Solution the screen is completely black sound is fine can change channels. the model number is hlt5087sx @marymary double check your model and chassis number. Make sure it is a SX and not a WX. Your set should have the ability to give you a basic error code with the front LED’s On this model a black screen with the lamp on could mean: Replace the DMD board. Of course it could also be the lamp or the ballast....
Chosen Solution my laptop turns on, the logo shows up, and then it flicks to a black screen then back to the logo and then just repeats itself and never shwos anything else, I’ve taken the back off my laptop removed part of the batter but 1 of the screws are stuck and the screwdriver won’t work on it now coz it’s stuck can anyone help or give advice please, thankyou...
Chosen Solution When replacing my screen+digitizer, the pick I used to separate the battery connector slipped. Now my iPad keeps re-starting and won’t charge. Any ideas? I’m not quite sure but it might be the battery because ipads tend to keep rebooting(or stuck in bootloop) if the battery is not in good health. I don’t want to make assumptions if its logic board related or charging port related. We need more information....
Chosen Solution Shark rocket duoclean soft roll won’t spin. If I take the soft roll out, I can see the “gear” that it snaps into is spinning, but when I put the soft roll in and snap it back in, it stops. I figure it must have some sort of “slip” designed in so if there’s too much load on it, the belt is allowed to slip instead of snapping or burning out motor....
Chosen Solution Someone stole my air 2 sim card tray so I ordered a replacement only to find out the the Air 2 sim card tray is different from the Air/Mini trays and thus does not fit. I can not find a replacement tray for the Air 2 anywhere, everything is for the Air/Mini or Mini 3 and they are not the same size. Any help finding one would be greatly appreciated....
Chosen Solution Hi, Just changed my 7 plus screen. Everything went well apart from the fact when swapping over the parts from the old screen, I lost the small white plastic square which goes under the light sensor. Any idea if this is essential and can it be replaced without buying a new genuine screen???? Thanks. The part is highlighted in the attached image. Hi, I have replaced the camera flex without the filter and it has worked but it’s something to do with the phone being black because they don’t use this with white screens....
Chosen Solution I need step-by-step directions on repairing the malfunctioning door locks on a 1990 Range Rover. Thanks for any help that might be given. ronalink, Power door lock actuators replacement page 58 in the Range rover instruction manual below. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. SYMPTOM POSSIBLE CAUSE CURE S-Central door locking does not operate (on all doors)...
Chosen Solution 27” iMac Mid-2011 CPU 2.70 GHzSMC Version 1.72f2OS – El Capitan Problem: When I try and install either Sierra or High Sierra, I get the following error during the installation: “macOS could not be installed on your computer. An error occurred installing macOS. Use Apple Diagnostics to check your MAC hardware…” When I run AHT, it gives me the following error code: 4MOT/4/40000003: HDD-1217. From what I understand, this is a fan motor error for the HDD....
Chosen Solution I zipped the “My Documents” folder in WindowsXP ( SP 3 ) using the default application (Send To- Zipped folder) and now it won’t unzip. When using the MS app it comes up " The Compressed folder is invalid or corrupted" I tired WinZip " Cannot open file; it does not appear to be a valid archive" Tired 7-zip " Cannot open file…. as archive". Tried doing a virus scan on it but came back clean....
Chosen Solution Anybody know ? Will 97-98 steering column work in 94- early 95 jeep grand cherokee @kagin_asylum same part number so it should fit. If you go to a decent “recycler” they can check with an interchange manual.
Chosen Solution Water spill on my MB Air. Replaced the logic board. Batteries will not charge (a separate issue), so I start it up with the magsafe plug attached. Boots like normal, but by the time it gets to the login page, the FAN IS RUNNING AT MAX. The fan speed gradually increases over the first ~30sec after booting. Any suggestions are greatly appreciated… Check both sides of the trackpad cable, the trackpad PCB and I/O cable for liquid damage and burnt pins....
Chosen Solution My mac is currently not booting. I want to boot off of a usb. Like when you use a cd you hold c but what a bout the usb. Thanks! Hi, This should work the same way as a CD, http://www.idownloadblog.com/2015/09/14/…
Chosen Solution Hello, had a problem with my memory card reader so replaced that. Since putting it back together the menu’s work ok with the directional pad but when I load a game the character just runs to the right all the time in Dexter. Tried with another game that boots to the menu and it keeps scrolling downwards in the menus (could be due to it going right?) I’ve tried removing the analog stick, but the character still goes right in game....
Chosen Solution Hey. So i’m have encounter a problem that I never seen on iPad mini 4, been doing these repairs for a couple of years but never seen it tho. Did a screen replacement for a customer, everything went fine. But when i’m trying to start the iPad , straight after apple logo i’m getting a red screen. Then it just reboot itself. I have tryd with several differents screens and checked HB flex cables....
Chosen Solution Might be a bit difficult to see, but I get this green tint coming from the left of this monitor if you can see it, and it seems to go in lines. The problem seems to be getting worse, and now it’s showing red lines too, but the right half of the display seems to be completely fine. Does anybody know what is causing this? I’m also noticing that the red lines seem to show up on dark webpages and you can sort of see a “ghost” image of the UI from the bright webpage you were on last....
Chosen Solution can i replace it due to i like N8 mobile since 4years it ismy first mobile so i want use it still i used but not comfort due to battery is shout down and when in coming call it is shoutdown batter backup is not good murthy varigonda, sounds like a good phone. I’d replace the battery and see if that will help to keep the phone a bit longer....
