Chosen Solution When I turn on the screen shows ( power off, airplane mode and lock now) and won’t do anything. When I push the power button again it will disappear but comes back when I push it again Try hard resetting it. Not sure how its done on your tablet but you can look it up on the internet.
Chosen Solution I have a Sharp Microwave Model # R-4A54. When I push the door open switch. Door doesn’t open. I open the microwave and found that if I lift the door open latch from inside little further, door does open. That means from outside door open latch doesn’t have enough torque to open the door. What is the problem? Is there any spring anywhere, which I am missing. Thanks....
Chosen Solution I recently was traveling in Canada and have returned to Australia. I bought this phone in Telus store for full price. I inserted by Rogers Prepaid sim card and everything was fine. Now I have inserted my Australian sim card, it was asking for a sim pin number. But there is no sim pin number on my australian sim card. I tried usual combinations i.e. 1234, 0000 and tried my pin number....
Chosen Solution I have a Latitude E6440 (i5-4310M/AMD 8690M 2GB/HD 4600) I am working on qualifying as a replacement for my i5-4300M/HD 4600 model, which has issues with the motherboard USB ports and it is showing the early warning signs of failure. Due to the early warning, I am preparing to get a unit ready so I can replace it and then use the old one for parts - these boards are about as much as the systems, so replacing the board doesn’t make sense....
Chosen Solution My Kenmore Microwave model # 665.68681891 just stopped working and has an -F6- code on the keypad. The motor sounds like it is humming and trying to start when I close the door. I flipped the breaker but it didn’t help. Rachel Beaver your 665 model number prefix means that it is made by Whirlpool. the Whirlpool error codes list F6 as a failure of the door switches. You could see if it works by gently lifting up and alternately pushing down on the door / handle....
Chosen Solution I have a 1TB pure-flash/SSD (not fusion drive) Late 2014 Retina 5k iMac. I believe that the SSD in this iMac is a PCIe x2 card, not a SATA drive, it’s whatever Apple put there in the factory. I would like to add an additional 2TB Samsung 850 EVO SATA SSD. Does this iMac, ordered from apple without a SATA drive, have a place for a SATA drive with the appropriate cables?...
Chosen Solution After replacing the battery, the volume from the front top ear speaker is very low. Is there a setting for this volume? If not, any suggestions why this may be so? Thanks. While in a call, press the volume up button. It will show the volume on the screen and adjust it, just like with the normal loud speaker. If that doesn’t work, try taking it apart again and cleanup the connections for the earpiece speaker, including; the contacts under the speaker, and the flex ribbon cable on the logic board....
Chosen Solution I have tried SMC reset once, but to no avail. Any suggestions? Sounds like you have some liquid damage within the logic board. You’ll need to open the system up to inspect things and you may need to remove the logic board completely as the other side will also need to be checked out. Here is the IFIXIT guide you’ll need to follow: MacBook Air 13" Early 2014 Logic Board Replacement....
Chosen Solution I see that the latest questions about the homebutton are from march, I was just wondering if anyone has any news on the homebutton. to use non-parred homebuttons and get the button to work but not the touch id like with the ip6 ? or is the iphone still useless with an oem-homebutton? Update (10/06/2017) Maybe you guys missread my questions.. I was wodering if there are any news on using third-party homebuttons....
Chosen Solution A customer brought in a PSP 1K that I’ve been having trouble with. When the AC adapter is plugged in the orange light comes on to indicate that it is charging, but it will not turn on at all. I’ve tried powering it on with battery and no AC, with AC and no battery, and with both together. Cleaned power switch internals, tried swapping the power switch daughterboard, and of course swapped out the battery....
Chosen Solution I have tried all of the options on the Android system recovery screen, but my tablet still won’t move pass this screen. An honest answer to why this tablet won’t start? I believe Walmart released the tablet for a Black Friday sale and only charged $59 for it brand new. It’s a cheap tablet and the designers weren’t going out of their way to make it last you a long time....
Chosen Solution My sister’s iphone got in a boot loop the other day. I tried hooking it up to itunes and then updating the software in the hope that it would fix the problem.However in the middle of the loading bar on the iphone screen itunes would come up with an error saying “an unknown error occured the iphone could not be updated”. I tried it several times. Now a week later it doesn’t even want to update now it goes straight to the reset option....
Chosen Solution My instax camera fell about less than 1m height, and now the red light next to the viewing lens is not disappearing. Due to that, i cannot take photos when i press the button. Help? Hi! A few minutes ago, I had the same problem. I also dropped my camera and the red light won’t disappear. I’ve tried other batteries but it didn’t work. After 30 minutes of changing the batteries it worked again....
Chosen Solution I have a 2014 iMac 5k that I will be replacing the screen. Since I’ll have it apart is it reasonable to remove the stand for a VESA bracket and does anyone know what part I’ll need to install? If it requires grinding/sawing on the computer I’ll pass on that part of the project. Your help is appreciated! Apple never offered an upgrade kit for the ‘Thin Series’ models....
Chosen Solution My 1TB seagate HDD failed and I replaced it with an EVO 860 SSD 1TB, using iFixIt kit and OWC thermal sensor. Upon power up (w Cmd-R) I first used Disk Utility to erase the SSD, then ran time machine. It kicked off a 6.5 hour job restoring and I went to bed. When I came back in the morning, the machine seemed asleep and screen was black. Unresponsive to keyboard or mouse....
Chosen Solution I just recieved my iphone 5s battery and i proceeded as usual with repair, put new battery in and as i stuck it in, i noticed the connector is a three prong instead of four…idk what happened. But i needed the 4. Please let me know my options Did you order it for a 5c? It maybe they made a mistake and sent you a 5c battery. Check the box and make sure what model it says....
Chosen Solution I’m looking to replace the battery in my Sonicare FlexCare HX9120. Do you have a replacement battery for this model? Thank you for your time, Richard Yes and a guide on how to do it, look here
Chosen Solution The original cord has frayed and come apart.I need ideas as to how to insert at the end where the phone body is, asa well as how to anchor the end that fits into the ear/mouthpiece. Since the original cord has frayed and come apart,you could replace it using a thick wire, with a black rubber covering. such as: You could try a thick piece of rope/string, or a charger cord could be a good replacement....
Chosen Solution Hi, I am following the manual of ifixit for replacing LCD screen of my tablet: Asus Vivotab smart. As screen frame crashed and touchscreen didn’t work anymore. Now after installation of new digitizer, I don’t have touchscreenr. B.t.w. I tested touchscreen with my old digitizer as well (as parts of the screen did still have touchscreen before reparement) but exactly the same response: Windows start up to start screen, but then it doesn’t respond to touch anymore....
Chosen Solution Hi, opened up my Samsung Book 2 Pro 360, to check out the storage (I have the 15.6 inch version, 16gb ram and 512 NVME) The motherboard has two M.2 Slots, only one is occupied with a 2280 formfactor: M.2 NVME type SN530 SDBPNPZ-512G-1004 (which is a PCI Express 3 x4) The 2nd slot seems to be a 2230 formfactor (right?) I am looking to replace the existing M....
