Posts

Chosen Solution Hello forums folk, I’ve seen this issue somewhat addressed on here a few times. If I had seen a fix I would not be writing this! So a few days ago I performed a battery replacement - I followed the guide on this site to a T, and took my sweet time. Upon start up I noticed the left side fan whir to a pretty aggressive start. I have reset the SMC, and NVRAM numerous times to no avail....

Chosen Solution I replaced the battery on my phone, and I think I damaged my #3 Ribbon Cable, because I can only hear through the speakerphone. Can I buy just the front panel assembly or front panel kit instead of finding someone to replace the ribbon cable Just replace the ribbon yourself. iPhone 3GS Proximity Sensor Ribbon Replacement

Chosen Solution Hey guys! I ordered a screen replacement kit and followed the directions. Everything went well, tested it and it turned on, home button worked, but touch screen did not. Company told me it was a defected screen and sent me a replacement. Just installed the new screen and didn’t seem to have any issues. However, now my iPad won’t turn on at all. I checked the charger with other things and confirmed it’s not that....

Chosen Solution After some quick diagnostics resulting from a battery that would no longer charge (flashing red power LED) when charging adapter connected, I figured the battery was shot and would no longer charge as the voltage was likely below the system threshold. After installing a new battery ordered from ifixit, all of the LED lights come on. When I plug in the power adapter, the battery does not appear to be charging and ll light remain illuminated until I remove the battery....

Chosen Solution Hi everyone! After replacing my USB C charger port according to iFixit’s instructions, it still doesn’t work. I’m still able to charge it using the smart keyboard’s circle connectors, but I really need my original USB C port to work soon. Any suggestions as to what I might have done wrong, or if it’s possibly another issue? hello there, the problem of charging this model is quite a common case....

Chosen Solution Where can I find a heating element replacement part for Oster toastermodel 6309 (copper color)? I know the toaster is still made in other colors, but I want to keep the copper color. BzyFinch check your heating element with a multimeter first. Check to see if it shows continuity. It is possible that your heating element is still okay but your control panel not. You need to ensure that the relay that turns the elements on/off is working properly and check the thermostat as well....

Chosen Solution I have a MacBook air late 2008 a1304 with the Logic Board MacBook Air Late 2008 1.6 GHz MB543LL 820-2375-A A1304. Part #661-4917 Can I replace the logic board with either?… Logic Board MacBook Air Late 2008 1.86 GHz MB940LL 820-2375-A A1304. Part #661-4918 OR The Logic Board MacBook Air Mid 2009 2.13 GHz MC234LL 820-2375-A A1304. Part #661-5198 You can replace it with another late 2008 logic board, not a mid 2009....

Chosen Solution Dropped my s8, it appears that the paint from the frame(along the sim tray)of the phone got damaged. Can this be fix? I googled different replaceable parts of s8 but didn’t see if the metal frame of the phone is replaceable. It is called the middle bezel you can find them cheap on Aliexpress.com

Chosen Solution Television turns on and off at inconsistent rates( but within 5 seconds either way) immediately after plugging in, new power cord arrived, same problem, buttons where disconnected and it did not help, visually inspected power board capacitors and they look fine( amateur). Any ideas Andrew Rumzie are you saying that it turns on then off and then on again? It loops like that? First you want to make sure this does not come from anywhere else but the TV....

Chosen Solution Hello There! Hoping someone can help me with this issue. I’m unable to find any other posts quite like mine so I figured I’d ask here. The screen on my Mid 2014 15” MacBook Pro Retina is not turning on when powering it on. If I connect the system to a TV with HDMI adapter, I can then power on the computer and the internal retina display will work!...

Chosen Solution Hey people who knows what is correct name and where I can buy a rubber that is on screws in MacBooks usually on CPU screw and so on Hi As far as I know you can’t buy these but you can get them from donor board or use some black shrink wrap These rubber parts aren’t really necessary as all they do is protect a screw mounting point but it’s up to you if you want to replace it Hopefully this helps Any questions please ask Thanks:-)

Chosen Solution Upon disassembling the sander, I found that the left armature bearing failed, heated, and melted the plastic holding it in place. I can’t get the gear off of the armature in order to take the damaged parts off. I think it’s reverse threaded, but no way can I get it to budge. Help I would think a repair should be possible. Or, have Craftsman tools gotten so bad that this cannot be repaired?...

Chosen Solution I have a rca tablet with a detachable keyboard. I was eating a bowl of cereal while watching something and I spilled a few drops of milk on the keyboard. Now the keys are sticking and if I press a key it ends up pressing several keys around it. I’ve given it a day to dry, cleaned in between the keys wit a wet wipe, blew into it, but no luck....

Chosen Solution My AirPods disconnect after a short while when in use with iOS devices. There are no problems when using non-Apple products or in use with a MacBook. The AirPods were working absolutely fine for more than two years. The problem started in July 2019 which happened to coincide with the automatic upgrade of the firmware to ver. 6.7.8. My wife’s AirPods which were bought at the same time as mine are displaying the exact same problems....

Chosen Solution Hello, I’ve researched in several places and nothing seems correct need to expand my current mac from 128GB to 512GB but are very expensive I found an adapter that converts ssd (mac) to ssd common what adapter do I need to buy to run this type of ssd on my mac? https://pt.aliexpress.com/item/12-16Pin-… https://pt.aliexpress.com/item/KingSpec-… I really don’t recommend using these adapters. When we tested them a year ago we found they had a heavy CRC error count....

Chosen Solution How can I adjust the screen brightness on a MacBook? It is very dim. Depending what model you have you can do it using the F1 and F2 keys. The F2 key increases brightness. If not go to >System Preferences> Displays and adjust it there.

Chosen Solution I replaced my iPhone 7 screen with a 3rd party screen that comes with the front camera, earpiece, etc, and now when I go to use the front camera, all I see is black. I have tried this with both the pre-installed new camera assembly and the old one from the original apple screen. what am I doing wrong? this did not occur before repair. Update (03/22/2018) nevermind, a restart has fixed it with the original camera, the new one does not work....

Chosen Solution 2009 Cadillac Escalade esv Rear (second row) seat will not heat. They have power to fold. Push button to turn on on back of front center console and nothing lights up. All other functions of rear entertainment center/hvac controls work. Any ideas? start with fuses Anything else will require circuit tracing requiring disassembly to access wiring.

Chosen Solution Old hard drive failed,so I bought a new one.I had a copy of windows xp ,so I did a fresh install.But some of the drivers were not replaced after the fresh install.The following drivers are missing(Ethernet Controller)(Multimedia Audio Controller)(PCI simple communications controller)(RAID Controller)Does anyone know where I can find them to download? Hello Vernon! Which computer do you have? You should be able to go to visit the company’s website and download the drivers for you’re computer model....

Chosen Solution I can’t remove the two screws near the speakers to disassemble my iPhone 3G.They unscrew, then turn freely and won’t drop out of the holes. they don’t stick out enough to grab, magnet didn’t work. Any suggestions? did you get all the other screws out ? if there are only the two screws left - you can pull slightly on the speaker assembly and try to unscrew the screws