Chosen Solution So you can’t separate the LCD from Digitizer but… can I buy the digitizer and lcd and frame separately and put it all together? if it won’t be glued like the preassembled unit why are companies selling the parts separately? You can put it all together, but if you don’t attach them with glue, dust could possibly get in between the digitizer and LCD. In my opinion, companies are selling them separately to rip people off....
Chosen Solution Hi There, I have a problem, When I switch on my Nikon D80 On the LCD “Err” is flashing. THe Flash doesn’t pop up The AF Doesn’t work The DoF preview doesn’t work. But the shutter works, but no images are stored. Sometimes the Mirror stays up, until I take the next picture. I Have a Service manual, but this error isn’t discribed. I somehow managed to work for 10 Pictures but then the same happened again....
Chosen Solution I had brought this furby. Took it apart. Wash the fur an now the eyelids won’t close or open. How can I fix this? I have put some WD40 on it an nothing A wire could be unsoldered/ripped, or the gears could be jammed, try spinning the motor and see if the eyes will slowly open/close
Chosen Solution I bought this tv when new and the picture and sound were still great, I would really like to keep it. The screen was broken accidentally and I would like to know if it’s possible to find a replacement. The mode# is SV472XVT and serial# is LSPFKBLI200706. Dan, yes it is replaceable, but very hard to come by and most certainly more expensive than a new TV. The part number is LC470WUL-SBM3 and it is an LG panel....
Chosen Solution I am using a ASUS ZENBOOK, Modèle : UX21E laptop fitted with the Qualcomm Atheros AR9485WB-EG WIRELESS NETWORK ADAPTER w/Integrated 802.11 b/g/n and I can not see and therefore can not connect to my 5GHz wireless network. How can I get this PC to see the 5GHz network. My network is fine, Im using a Linksys WRT1900AC dual-band router. With the ASUS I can pick up the 2.4GHz band but not the 5Ghz band which I want....
Chosen Solution I have a mid-2011 27" iMac (12,2) that stopped running while in a sleep state overnight. The machine’s drive had been replaced with an OWC SSD that included a temp sensor about a year ago and it had been running without issue. I rarely ever heard the fans running. I found that the power supply unit had input voltage, but all outputs were 0. I installed a new PSU from iFixit and the machine booted normally, but the fan(s) started running (fast) and after 15-20 seconds the screen went black....
Chosen Solution how do i add either ch 2 or ch 48-1 to xhannel list Hi, Here’s a link from the User Guide for your TV that shows how to add channels to the Channel Scan Memory list. Hopefully it is of some help.
Chosen Solution I am repairing a 30GB ipod video…logic board. Do you have any of the adhesives strips used to hold the logic board in place or for that matter any of the other adhesives such as the adhesives used to hold the battery? Here’s a link to a company that supplies electronic double sided adhesives: http://tcsidike.en.alibaba.com/ The best they have here are these adhesive strips for the iPhone 3G front panel....
Chosen Solution Hi, I dissassembled my printer twice after cleaning the printheads as initially it didn’t turn on afterwards. After swopping one of the tabs around I reassembled it and it turned on. It began to clean and after a minute or so the light went off and now it won’t turn on and emits a quiet beeping. What have I done wrong? I found the replacing of the tabs very difficult to see in which direction they should be inserted....
Chosen Solution My front glass screen is broken. There is a small purplish mark towards the edge, is this just the glass or is it my screen underneath. It kind of looks like a tiny purple fingerprint Here is a tutorial to replace cracked glass in your smartphone: LG K10 Screen / glass Replacement
Chosen Solution One end of the hinge on the Google Pixelbook Go has slipped out of place. I do not know how to reinsert it. The two pieces of the clamshell do not feel flexible enough to bend and allow the pin to slip back into the hinge. Curious what you ended up doing here. Your issue (and mine) is that the hinge itself is broken. This is caused my the screws loosening causing a torsional flex in the hinge when then snaps it....
Chosen Solution Inside my three. Five lightning jack adapter for an iPhone I have a red wire a cup of water a green copper wire red and copper wire green wire and a blue wire what are these see if this helps: Help with splicing Turtle Beach wire
Chosen Solution Hi all, I bought a used Canon 24-70 f2.8 II, got it for a great price but the front element was a pretty scratched up. So i called Canon and got a front lens assembly thinking i could replace it myself rather than spending 500-600$ for them to do it. The problem is once i took the front ring off i noticed that 2 out of the 6 screws holding the front lens assembly were totally stripped....
Chosen Solution Is there anyway to repair the cord if its hanging onto one wire? Hi Erin, I’ve just signed up and asked a question of my own so probably should give advice in return. To answer your question yes there is but like all repairs it depends on the cable and your skill level. I’ve repaired many, you have to expose the solder pads inside the connecter case/housing and solder the wires back on....
Chosen Solution where is fuel filter placed and difficulty of replacement on F150 2001? JUeff Dempsey , 2 Video’s below showing how to change fuel filter, not to bad of a job for DIY, Good luck. I hope this helped you out, if so let me know by pressing the helpful button. https://www.youtube.com/watch?v=uhIcZUZ4…
Chosen Solution Hi I changed the housing on an iPhone 8 and the metal bracket around the charging port wasn’t present on the new housing. I tried to remove it from the original and it was hard to remove and bent quite a bit. Is it possible to buy new brackets and replace or can these not be replaced? This is an example of one but for an iPhone 6…. http://shenzhenparts....
Chosen Solution i replaced the u2 ic of an iphone 5s this is my first experiance with the u2 ic i think i have miss placed a tiny resisitor near u2 ic when i try to boot the 5s it stays at the apple logo, can i jumper that part and boot. Nipuna Dharmewardene definitely not until at least you find out what it is. It is never a good idea to apply jumpers across components....
Chosen Solution Is there any way I can get a different type of cable that will fit the red antenna cable on my Galaxy, since they are out of stock and I need one asap! Unless you are good at altering this type of cable to expose the ground braid at the certain point that it hits the frame it would have to be ordered. There is a section of that RF cable that hits a plate within the side of the frame, which underneath, most likely, goes around the frame....
Chosen Solution I can print one copy after I turn the printer on. A second attemp will give me a “Scan Failure”. I restart the printer and the same thing happens. If I try to Scan, I get the overview ok but The scan failure comes up if I try to scan. I looks like the scanner is not returning to the idle position after a first scan. It sounds like your reading head for your scanner is not returning to it’s “home” position....
Chosen Solution My iPhone 5 is acting crazy. It is clicking by itself randomly and the screen is randomly unresponsive so suddenly it responds. I changed the touch screen twice, reinstalled IOS from scratch. Nothing of this helps. It is still acting crazy. Here are some pictures of the digitizer connector. Were you wondering if there were any uncovered contacts? Some pictures of the connector here: Here is the connector after I cleaned it with isopropanol and a soft toothbrush: After cleaning....
