Chosen Solution I have a Panasonic TC-L47DT50. After being turned on, the tv turns off and back on repeatedly by itself. I have replaced the main power board, but the problem continues. Any suggestions? @bcbh252 since you’ve already changed the power board you want to tell us exactly what your TV does. We do need to know if it physically turns on and off or if this is just the screen....
Chosen Solution SD Card will not click into position, it bounces back out, I can shut the door and make it go in, then the review gives me the message there is no card. I had this issue, did some research and found out that a tiny sliver of one of my SD cards could have broken off into the chamber. I got a flashlight and WA LA…. yes, that is what happened....
Chosen Solution Is the sd card slot connected to the Panasonic Lumix DMC FZ1000 4K Main Board? chances are no, sd cards on cameras are almost never sottered on and can easily be replaced/removed by opening the lid covering the sd card and gently pressing it and pulling it out
Chosen Solution Did a normal charger port replacement for an customer (iPhone 5S Black) After the replacement its plays sounds, charges, microphone and mini jack all works. But it shows the following message Translated “Could not activate touch id on this iPhone” The home button ( the button and the touch id) does not work. No visible damage to either charger module or home button flex. Suggestions? Charger port bad? High copy aka no support for latest IOS?...
Chosen Solution I need some help, I purchased a 850 EVO SSD which I can format externally using a thunderbolt case. I formatted it: Mac journal/partition1/GUID base for Mac but when I put the SSD inside my system the disk was not formatted properly so I can’t install a fresh copy of the OS. I need some help pls This series does have a fragile SATA cable. At this point I would replace it....
Chosen Solution Heeeeelp! I know this is the wrong category but I couldn’t find anything closer. About 3 months ago, I got an old Ibook G4 model. I’m a lifelong Window’s user, so apple stuff is extremely foreign to me. My laptop only had like, 60 GB of space, so I went and tried clearing as much clutter as possible cause it always ran all choppy. I didn’t wanna mess anything on it up, so I also looked all over the internet for cleanup applications…which I couldn’t find any of....
Chosen Solution I have a PS3 Slim in which I was going to replace the hard drive on, however the blue screw to get to the hard drive enclosure is so incredibly tight that even with the most amount of force I can muster, I cannot, for the life of me, turn this screw even a bit. Any suggestions? Try putting a towel with a lot of grip in between your hand and the screwdriver, hopefully the towel will increase traction between you and your hand....
Chosen Solution so my Psp go isn’t working. the last time i used it was probably last year in October. I just found the charger and decided to charge it so i could play on it. I left it to charge for a good three hours, when i go see if it’s charge its not. i held the on button for a good 20 seconds and it still wont charge. Let’s see if you know any ideas to help me out...
Chosen Solution Hello ifixit community, here is my problem; I have a working motherboard with the wrong region and another one with a broken DRC-WUP graphic chip with the right region. I just want to solder the chip where the region lock is located to the working motherboard. can someone tell me, where the region lock is located on the wii u gamepad motherboard? Thanks for helping, rgds Thomas I can’t confirm that....
Chosen Solution How do I replace the passenger side fog light bulb? You’ll need to go under your car to get to the hidden access port. Here’s a good guide Kia Sorento Fog Light Bulbs Replacement Guide
Chosen Solution where is map sensor? and how to get to the sensor Dicksen Mah , The MAP sensor on the Honda 1.7 engine is stuck in the intake manifold right beside the throttle body(driver side) held by 1 bolt. Remove plastic filter air ducting from above throttle body. Remove the map sensor by unplugging wire connector, remove the single bolt, then grab the sensor and with a slight twisting motion pull sensor out....
Chosen Solution I was having a problem with my battery life so I replaced it with a new battery. After install the screen no longer comes on. So I opened the phone back up and checked the connections and they seem to be connected correctly but still no screen. Any suggestions? By only replacing the battery such type of fault not appera like that you can change the lcd and check because while the display is band on 45% over while on screwed on board the flex might be damage and cause such type of problem....
Chosen Solution My macbook was getting pretty hot doing medium stress task, so I thought it was due for a thermal replacement. I popped open the macbook, being careful of all the wires, and replaced the paste with pea size MX-4 thermal paste. When I put everything back together I tried turning it on and it made the boot up sound and everything, but no lights came on. No LCD, no keyboard light and no apple logo on the front of the laptop....
Chosen Solution I had an old Apple battery with 1200 or so cycles that was suffering sudden reported battery percentage drops, and shut-offs from mid to low battery percentages. The above graph is a replacement iFixit battery which also suffers from drops and erratic readings. The drop above was after the computer was allowed to sleep for one day. The final readings above when running the battery all the way to computer shut-off are also erroneous: a sudden drop down to 7% and then one hour of life at 7% and 6% before total shut-off....
Chosen Solution Where can I find a good replacement motherboard for the Asus Tuf Gaming fx705g? Hi, What is the full model number of the laptop, as it appears that there are three models i.e. FX705GD, FX705GE & FX705GM? The above links are to the only motherboard supplier that I found when searching and even they have none in stock but it can be ordered if you’re prepared to wait and also pay the price....
Chosen Solution I suddenly have a vertical column of discolouration on my laptop screen which does not exist when I connect my laptop to an external display. Would my diagnosis of a flawed display cable be accurate?If so, what’s the easiest way to replace it? I’ve already attempted disconnecting and reconnecting the EDP cable on the MB end but that didn’t do anything, which would push me towards the other end of the cable having the issue (or the cable being internally damaged)....
Chosen Solution I’ve recently change the micro switch of my Logitech 302 - Daedalus Prime due to double clicking issues. I’ve got the left click button to work as well as one of the side buttons but the right click button still doesn’t work and also one of the side buttons. Any help? From here I can see broken Pads/Ways (Copper Ways) and bad contact in one of the pads that you soldered, get a multi-meter and FLUX!...
Chosen Solution Having a real hard time getting the screen to pop up enough to separate it from the body. I tried everything and it won’t budge. Tips? hello millerino, What kind of advice do you need? I’ve already opened 12 pro hundreds of times and don’t see a problem. What happened in your case? warm up the screen a little - from the screen side. The screen itself is projected to 380 degrees Celsius so you don’t have to worry but you can’t overdo it....
Chosen Solution Good evening. I am new to asking questions on the forum so please pardon my lack of knowledge on this website. I have an Early 2015 Mac Book Pro that I just replaced the battery in. Everything went swell. I closed everything up and tried booting it and it went into “safe boot” mode. I tried logging in but kept saying my password was wrong. Using the “reset password using apple id” I determined that it is almost as if the left shift key is being held down....
Chosen Solution Quisiera saber cual es el tipo de batería de litio que utilizan los iphone 6 Lithium-Cobalt Oxide Battery.Lithium-Titanate Battery.Lithium-Iron Phosphate Battery.Lithium-Nickel Manganese Cobalt Oxide Battery. …Lithium-Manganese Oxide Battery. *The three primary functional components of a lithium-ion battery are the positive and negative electrodes and electrolyte. Generally, the negative electrode of a conventional lithium-ion cell is made from carbon. The positive electrode is a metal oxide, and the electrolyte is a lithium salt in an organic solvent....
