Chosen Solution I think, i broke the SD Card Reader of my iMac (Retina 5K, 27 Zoll, 2019). Ist it possible to replace it? Sadly, it’s part of the logic board port assembly. Do you have AppleCare+ service contract or live in a country which requires 2 years of warranty?
Chosen Solution The SD-Card reader of my mid-2010 MacBook Pro 15.4” seems to have a loose contact. The SD-Card is sometimes read, sometimes it is not. I tried contact cleaner spray which seemed to help once, but didn’t fix it sustainably. Any other idea what I can try? (I’d rule out re-soldering the card reader on the logic board, I’d probably break more than fix) Sadly the SD card reader is a soldered on connector to the logic board so the only solution is to replace the logic board to fix it....
Chosen Solution how can we get this repairs. Carousel is in great shape and stored in the original box, but this year I literally cannot find the switch to turn on and off and select music. Help please. Rachel, I just bought a Mr. Christmas Carousel at an estate sale. The on/off switch is apparently glued in place and when the glue came loose, the switch on mine fell into the base....
Chosen Solution I had good internet speed on pages (online games - java vids - youtube) but its gone very slow over the last week- the other comps in the household are ok though?? is it a virus or can i do or have i done somthing for it to be acting this way Plug it into your router using a hardwire cable, reset your network preferences and see if there is a difference in speed....
Chosen Solution Hello! Yesterday I’ve bought Macbook Pro 13 2012 without hard drive. When I installed it at my home, I faced with next trouble: system was too low and fans worked at maximum speed. And my macbook doesn’t see battery. I made AHT and got next information: 4SNS/1/C0000008 : TAOP – 124. Do you know what is it? Update I made full test in Apple Service Diagnostic and I’ve got next results: [12/28/14 13:15:31] Temperature (TA0P) – Ambient Air Sensor (test #1) - Sensor Reads Within Operating Range...
Chosen Solution My iPhone 5c doesn’t connect to iTunes, turn on, charge or repaid after a hard reset. I took it into a phone shop and they sai it could be battery or an IC fault. So I replaced the battery and still no life. Can anyone help me figure out what is wrong and what an IC fault is and how it can be fixed. Thanks Chris The issue isn’t the battery, it will be the IC chip in the phone....
Chosen Solution After replacing the surface pro 4 LCD, it won’t turn on the battery mode unless i plug it with the charger After i had replaced a surface pro 4 LCD, won’t turn on battery mode unless plug it. Before taking off the broken screen the pro was working good just the screen was broken, so i turned it off then started working on it. after taking off the old broken screen....
Chosen Solution I ordered a PSP 3000 on eBay, and the seller shipped the device with the battery in it. The PSP was in my mailbox for 3 or 4 hours in roughly 15-20 degree Fahrenheit weather, and the battery became swollen and no longer charges. The PSP would not power up when plugged into an AC adapter. I took it apart and found that the power fuse (I believe it is labeled “TD”) was blown....
Chosen Solution Hi all! After I replaced the battery of my iPhone 6 I had issues with the rear facing camera (and flash) not working. Using this forum I found that it could be that the camera got damaged while replacing some parts, therefore I ordered a new camera, replaced it and it worked, great! (Or so I thought). After using the phone now for two days I found that the camera sometimes works but more often it fails, even weirder: sometimes I am able to use the flash and not the camera and sometimes I’m not able to use either of those… I am really puzzled by this issue right now, how can it be that the camera randomly switches between working, only using the flash and not working at all?...
Chosen Solution is recovery problem in blue screen laptop not boot The SSD most likely gone faulty. Will need to be replaced + windows re-installed. What I would do first is get windows re-installed as it sounds like the SSD may be still working fine. Otherwise the SSD might need to be replaced or instead of replacing SSD get a optical drive caddy + replacement hdd or ssd.
Chosen Solution ı have 2 n64 full set. ice blue and classic. ice blue works well. i have 3 cartridges and i play them all on ice blue. all the cables , adapter and joystick works including classic n64s. i checked them on ice blue. i checked both expansion packs on ice blue and it worked again. SO… THERE IS A PROBLEM I DONT KNOW BUT ITS NOT THE EXPANSİON PACK , JOYSTICK, ADAPTER, CARTRIDGES AND CABLE....
Chosen Solution My Polaroid SNAP wont print out pictures. The 3rd red light is blinking. Do I need a SD card that way it can work? Someone please answer ASAP. @anonymous__ ,Anonymous, Find below links to troubleshoot your Polaroid SNAP, If the camera is still under warranty and problem persist after using the trouble shooting guide link #1 and your manual link#2, then use link #3 for contacting Polaroid support and warranty....
Chosen Solution Hey, If you remove the back panel to check for water damage on the water sensors, will the warranty be voided? I just want to remove, check, maybe dry it a bit if water is in there, then put the panel back on. It doesn’t look like, from your pix and other videos I’ve seen, there is anything that would indicate the back panel was removed. Is that so?...
Chosen Solution I replaced my battery in my moto x pure, put the phone together and it seems to power up ( at least it vibrates ) but nothing appears on the screen. I then looked at the repair manual for replacing a screen and tried to make sure all of the connections were correct but it didn’t help. Any Ideas? Make sure the LCD connector isn’t loose. In this link, step 10 tells you where the connector is....
Chosen Solution Hey everyone… I just replaced my phone broken screen and digitalizer. And it was just yesterday that my phone was in my pocket and was switchedoff…. But when i turned it on it showed me a black screen. But my phone turns on and i can even unlock the pattern lock and here notifications and even play music…. Someone please help me… Update (06/10/2017) it looks like this now...
Chosen Solution Hello, I just got a replacement battery for my Macbook Air from iFixit. When installed, it is not being recognized. But when I take it out and put the old battery back, it is recognizing it fine. Is there anything I can do ti fix this? Thanks. Update (09/21/2020) Hello, Thank you for you response. I have installed the Coconutbattery App and tried, but it was not recognizing the battery at all....
Chosen Solution I got my daughter a macbook pro for Christmas. The battery began giving her issues at the end of January, then finally ballooned up about two weeks ago. I ordered her a new one here on Ifixit and had her install it. She can’t get it to charge at all. We have been working on this over text message, so i don’t have the problem in my hands. I’ve been looking stuff up on this forum and then forwarding it on....
Chosen Solution How to replace the beater bar belt Hi Ginger! I completely dismantled and rebuilt my Dyson. Since I cannot find a guide on this site for your model Dyson to refer you to while I try to explain the procedure, I suggest entering “Dyson DC14” into YouTube. There are videos by “eSPARES” that show you how to replace the belt. Indeed, there are several videos by different people showing you how to change the belt....
Chosen Solution While playing on the tab, the screen will go black and when I try to go back in, everything has frozen, nothing works Glesni, I would suggest that you try to perform a hard reset. This will delete your data. Should your Galaxy Tab become unresponsive, you can perform a hard reset which will return the Galaxy Tab back to factory default settings.:" Ensure your Galaxy Tab is switched off....
Chosen Solution Computer doesn’t turn on, shut off as I was using it, screen doesn’t turn on or work, after pressing power button, fans turn on and speed up to jet mode but nothing on screen. Sounds like a failed GPU. First think id do is test it on a separate monitor using the display port. If it shows a picture, then I’d start troubleshooting the display connectors and cable. Did it display any odd behavior before it shut down?...
