Chosen Solution I have a 1982 240d it sometimes turns on after a lot of cranks but only stays on for a couple of seconds and then shuts off. Previously the car was working perfectly but it had poor compression so I decided to take out the engine and rebuild it. Once it was time to put everything back together and start the engine, the car only turn on twice n shut off right away....
Chosen Solution I’m the original owner of a mid-2013 Macbook Air that’s been working great for the last few years. Over the last month, I’ve run into a new problem that’s been extremely frustrating. I’d like to avoid getting a new laptop, but I’m stuck. I poked around the forums and got Coconut Battery and TG Pro to try to help troubleshoot. Problem: when the Macbook is not plugged in, it will shut off within 2 minutes....
Chosen Solution I have a Sony KDL-55W802A tv. Walked into the room the other day and the tv wouldn’t turn on and the red light would repeatedly flash 3 times. I looked up the code and it said it was either a bad main logic board or the power board. I tested and replaced the power board to no avail. Can anyone please give me insight into this issue? I’m stumped!...
Chosen Solution After replacing my screen my phone worked for 30seconds with the new screen and then completely turned off. It wasn’t just the screen turning off as there was no vibration or anything. Swapping back to another screen doesn’t fix it either. The phone is now unresponsive which makes it hard for me to troubleshoot. I believe I’ve tried all the reset, hard reset options, etc. The device is not seen when connecting to iTunes....
Chosen Solution pulled out sensor wire instead of plug iMac Intel A1224 emc 2133 I am replacing the power supply to my iMac. I could not disconnect the tiny plug with the thin wire, I accidentally pulled out the wire from that tiny plug. What do I do now? Is there any way of soldering it back in or purchasing that part? Everything else went fine with the disconnection. I just can’t afford to buy a new Mac....
Chosen Solution So I have had my S7 Active for 6 months now, and it has developed a thin purple line down one side of the screen. The problem seems to be intermittent, fixed temporarily by either touching the top right of the screen, going into the screen calibrator, or rebooting. Whatever method is used, its will come back at a random time in the future. I have seen many posts elsewhere with people having the same issue, and the only recourse so far has been to send it back to Samsung ....
Chosen Solution G.E. Arctica PSC25NS 2006 refrigerator water dispenser light flashing and no longer dispensing water or ice - now nothing works on control panel. Ice maker makes ice. This happened after several weeks of inconsistent ice dispensing, with no problems during that time with water dispensing. Seems like ice would drop into chute and get stuck, and then the control panel would freak out. Took off the faceplate/dispensing control board several times, found lots of moisture (black mold originally) around ice chute door, solenoid, and other plastic works....
Chosen Solution Hi, My LG TV from 2018 - model OLED55B7T - over about 4 hours went from normal function, to displaying a fully black screen for a few seconds, and now is completely black. TV is on, I can hear sound, but nothing at all is displayed on screen, no matter what buttons/menu’s I try and enter. Question is, has anyone repaired a TV from a similar state back to working condition or am I wasting my time to even try?...
Chosen Solution Is it possible to replace the Audio Jack on this, or do you need to replace the whole Logic Board? Hi I believe you can Yes! It’s on a separate daughterboard/cable and doesn’t require much effort to get it out:-) There’s plenty on YouTube videos to follow along with like this one:https://m.youtube.com/watch?v=xrtNZePg1o… Hopefully this helps Thanks:-)
Chosen Solution I bought another nexus 6p from ebay that only said that it wouldn’t turn on at all. I swapped the screen with the digitizer into my phone because I had recently broken my screen and damaged the digitizer trying to take the phone apart to replace the battery. I’ve got it all back together now with a new battery and the new screen and digitizer and it boots and shows the google logo and then asks for my pin code but won’t register any of my touch inputs....
Chosen Solution replaced screen on my iPhone 7+ and ever since the home button isn’t working Is this something Apple insists on doing? If so how do I fix it and at what cost. Thanks you have probably damaged the button when removing it from the old screen. you would need a phone technician / microsolderer to look at it
Chosen Solution Hey I own a small repair shop, I just did a iPhone 6 screen replacement, and both replacement screens had lines through the display, I took apart the phone many times to check the flex cables were seated correctly and reconnected the battery nothing work, resulting in a lost customer You have one of the following : Several bad screens Mashed up lcd connector on the motherboard One of the lcd chokes is failing or has failed Lcd driver chip is failing You can also get lines from a failing touch ic, but usually you get sketchy touch with that too....
Chosen Solution OK - so I have taken apart my macbook to replace the keyboard, and I realized I needed a T2 screwdriver, and have ordered one. Does anyone know why there is a T24 sticker on there as well? after an hour searching, I realized that bit doesn’t exist. Will just a T2 handle all those crazy screws?? Pulling my hair out… If the screws are all the same size, yeah, your T2 should be fine, as it will only truly fit T2 screws....
Chosen Solution How to replace the crankshaft Randy Littlefield that’s a tall order to explain on here. Try a service manual like this 276781-Single-Cylinder-OHV-BRIGGS-&-STRA.pdf
Chosen Solution I’ve looked online a bunch but none of the things I found helped.. The phone has been dead for years, found it recently during cleaning. I know there are a ton of memories on it. Also, I THINK the phone model is correct.. it’s been years, but I’m 85% sure the one on the picture is identical. When i plug the phone into my PC, it is detected.. but not recognised....
Chosen Solution I have a 2007 nissan note, the car went into safe mode and the engine light came on. i could only take it home as it wouldn’t go over 1500 rpm. so far i have changed the throttle body and the secondary computer (fuse box) however it keeps breaking the fuse and going back to safe mode. we have also checked the wire looms and no breakage. Any suggestions?...
Chosen Solution RTRQ6522-US Power indicator light flashes on/ off steady. Before the light was always on steady. Won’t turn on with remote and no buttons on TV. Tried unplugging overnight. Still same. @browns46 Okay so now I get it. I think ;-). You have a new power board everything works except you have no sound. Okay got it. The audio coded and amplifier is on your main board. Check to see if there is anything that looks odd on that....
Chosen Solution I just replaced the battery on a Samsung s7 i completed it but now the screen went black i can turn the phone on have you check if the connection is in a good place. maybe the screen has a problem too. its couple of the screen I received and they are broke or don’t work .
Chosen Solution Hp2000 notebookPC I am trying to get the external monitor to work? @kenmahon here is what the manual suggest. remember that this series is having issues with the GPU circuitry. so it may not be a simple display issue but could be a motherboard issue. Start by connecting as suggested and go from there.
Chosen Solution Just git this iphones 6s plus, the screen works, somtimes, somtines not, some times restarting helps, somtimes not, screen has no visibke damage, what coukd the problem be? Hi @natedawg22 I suggest you take a look at the cable as it seems like that could be an issue. If you don’t see any visible damage try to clean the connectors with some isopropyl alcohol.
