Chosen Solution replace right rear tail light assembly raoulmiranda , The link’s/guide below should aid in the removal of your Passat’s tail light. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://www.paulstravelpictures.com/Volks… https://www.youtube.com/watch?v=8IbY3DiY… https://www.youtube.com/watch?v=-keAc2Lp…
Chosen Solution Everything work, however, battery bulge. Ordered complete kit from ifixit for battery replacement. Turned unit off and followed instructions to remove battery. Replaced with new, supplied battery. Unit will NOT power up (have it connected to a computer). Screen flashes once after pressing power button, and phone vibrates once. No other symptoms. Computer does NOT “see” the phone (like it does if the phone is booted). Looks like the screen cracked while removing....
Chosen Solution This Element E4SW7019RKU TV had a backlight issue in March of 2022. When replacing the backlights notice three or four LEDs had burn marks around them making black marks on the back whitepaper. After replacing the backlights & testing them, there was a clicking sound from the PSU and an over voltage reading to the backlights, and the new backlights did not function. I decided to replace the PSU....
Chosen Solution Replaced Screen in IPad Mini everything was working fine. The battery was at 4% so I put it on charge and about 10 minutes later I checked it and it will not power on. Any suggestions? Hi Travis I take it you left it on charge for a while you can redo again to see check connections possible a faulty screen turn it on with the screen still loose in case its impeded when housed,remove battery(if possible) and try again no real way of checking as they are the devil to test unless you had same model again to swap it was old screen working at all will it still work back in again....
Chosen Solution While my phone was charging (Battery level 70%) I unlocked it to respond to a quick text and all the sudden the phone turned off without notice. I tried to power it back on by holding down the power button, but that did not work. I then tried to preform a hard reset on the phone, but that yielded no result. It has been 2 days scince the incident, and whenever I try to charge the phone the back area near the camera heats up to an uncomfortable level so I have stopped trying to charge it out of fear of damage....
Chosen Solution when i power on the phone it boots normaly but when it goes to samsung logo start blinking like you open and close your eyes fast that kind of blink it works fine but screen won’t stop blinking super fast . i cleaned the phone with alcool but no luck Adrian Zymeri as with any immersion, the importance is to not turn it on, or trying to sync/charge it, as this may increase the likelihood of shortcircuiting any components....
Chosen Solution Hey Guys. About two days ago I a pc from cyberpower pc, and I was playing csgo today and it just went white, and I’ve turned my monitor and pc off and rebooted it multiple times and its still white. I treid my pc on another monitor and it works fine. I did a little research and it seems like its either a problem with my monitor, or video card....
Chosen Solution I have a 15" Macbook Pro. The model is an early 2010. Whenever I boot up my system it doesn’t have any issues but as soon as it loads something the screen goes black. There doesn’t seem to be anything wrong with the display as a flashlight shone through the Apple logo on the back of the display does nothing to improve it and the flashlight can’t even be seen on the screen....
Chosen Solution Hi , Sim reader is broken and I have tried to remove it but in the removal process out of 10 / 1 soldering point is screwed and moved out of board . That point is one of the point which tell phone that sim has been removed or inserted in the phone. Can any one give me any solution at this situation that from where this golden point is coming from circuit or without this also it will detect sim card ( I don’t want to solder / desolder sim slot again thats why confirming before moving forward )....
Chosen Solution I have iPhone 6 (A1586) 64GB iOS 11.2.2 A) Siri can’t hear me B) Front camera does not record ANY sound, however the recording produces STATIC NOISE (like a dysfunctional TV signal) Some ppl have had some similar issues with various iPhone models, although NOT quite the same and I didn’t manage to find a solution yet. I know iPhone has 3mics. Calls / Facetime / Voicememos work perfectly and what confuses me - Instagram videos record perfect front camera sounds (wtf)....
Chosen Solution Hi, I’ve purchased this lovely portable Mac second hand for dirt cheap in good technical condition with some minor dents and scuffs all over the place. I needed a machine that worked great, was very repairable and I didn’t care for the visual condition. First thing first, I dismantled the whole thing very thoroughly and washed/dusted every morsel attached to it. I then replaced the spinning drive with a Samsung SSD for speed and cool operation....
Chosen Solution How to adjust the power stearing rack bush in honda Insight ZE2 The bushings hold the rack in place and are not adjustable . If you have play you need to replace the bushings. There are 3 on most vehicles , two for lateral sway and one for vertical. . Its easiest to remove the rack and then press in new bushings but if you want to you can remove them one at a time on the car....
Chosen Solution When you click on the button “Open” a pdf document is issued :“there was an error opening this document. Can’t find file.” What could be wrong? Asked the user to check for viruses. He said to periodically check for viruses (Kaspersky). If you open any other pdf file in the same way error also occurs? Just try to update Acrobat to the latest version. Or put, for example, Sumatrу....
Chosen Solution Hey i was hoping to get some advice, I accidentally knocked off the C0552 capacitor on an iPhone 6s when i tried unplugging a connector.. it was so small! I wasnt originally attempting a board repair until this fell off so im worried that it might be something critical. From what i see in the schematic its part of the “NORTH DC CURRENT BLOCKING CAPS” Screenshot: https://imgur.com/a/XIjDRMH Thanks I appreciate all the help i can get, I’m interested to seeing what its function on the board is too :)...
Chosen Solution About a year ago i replaced my entire LCD and apparently it was a garbage screen as the glass separated from the frame on the upper half of the device, at times the digitizer would go insane and make false reads on the lower half of the screen but when i pushed the top half it would go back to normal. Yesterday i simply glued back the screen to the frame successfully but now the false reads are even worse and i have come to find out that the only way to get this problem to stop for a while is to push the lower part of the screen slowly by the edges....
Chosen Solution I have a Coolscan IV slide/negative scanner and would like to clean it. There is gobs of dust on the element. Can’t really just get in there with an air can. There are screws holding the steel shrouding on the back, but I cannot seem to get the plastic front plate off. Not sure if it should pop off, or if there are other connectors. I would appreciate help here....
Chosen Solution Hi all, Is there any way to check if someone has done or attempted to do an iPhone messaging recovery on my iPhone 11 using one of those free apps. I think someone has done it without my permission. Thank you @dean8015, As far as I know, no such apps / applications talk back to the iPhone and “leaves” a trace about being used. Same way when I recover (or try to recover) data from a disk / SSD, when I run my apps, it only goes sector by sector seeing what’s there....
Chosen Solution Sir, Recently I purchased EPSON L220 from Visakhapatnam. While taking colour prints Red colour didn’t appear. Hi, Try to do deep cleaning and it will take 0.4 from a total of your ink. This should solve your problem. When you have tried twice with deep cleaning but yield no result then something wrong with your print head. This because some dirt traps on the print head and makes it can’t spray the inks....
Chosen Solution Hey i replaced an old battery for a friend yesterday, He told me today the phone gets pretty hot and won’t pass 51% when plugged in, When putting the battery in I may of done it crooked and I was having a bit of trouble getting the connector in, i had to bend the cable a small amount and i finally got the two prongs in and put a screen on to make sure it powered....
Chosen Solution So the other day I was replacing a screen and the flex cable that runs along the shield ripped. I was told this could be replaced, so I replaced it. Problem is, im getting anything from the phone. Any tips? Im fairly certain that nothing else is wrong with the phone. Thanks for any advice. Try to hardreset the phone by keeping the home and power buttons presed for 15sec....
