Chosen Solution Hi, is it ok to use b7000 glue to adhere the screen down? I found using the adhesive strips don’t hold up to well over time. I heard the adhesive strips by bowler tech is good but since I have b7000 sitting here I wanted to see if that will be good enough. Yeah the pre-applied adhesive strips generally aren’t enough I put B7000 liquid glue on the corners....
Chosen Solution Hi. My hisense sero 8 screen gets white staticy lines (like an old TV with radio interference) then it just gets colored lines. Sometimes blue screen with white lines and sometimes black with multiple colored lines. It just freezes like this. Turning it off and on helps for a minute, then the same thing happens. Hi, I have the same problem too. I bought one, liked the Sero 8 tablet so much, I bought another....
Chosen Solution Recently I dropped my I phone and the screen turned black and white and will not respond to touch. So I asked apple support they said I could be a digitizer cable shook loose I checked it out and that wasn’t the problem so I went to the Best Buy to have them look at it and they said that it was either something in the screen or my logic board....
Chosen Solution I see instructions for screen replacement for a Dell Inspirion 3520. I have a 3542, would they be the same for my computer? Thank you. Here are instructions for your model. I watched it on mute, so I can’t say anything about the spoken aspect. http://m.youtube.com/watch?v=f8QHI4tZJuA Thank you very much for the link. Here is the instructions page on how to replace your screen. Dell Inspiron 3542 LCD screen replacement...
Chosen Solution HP Touchsmart 310-1125y flashes the blue HP logo screen for about a second before the screen goes blank/black. The computer boot into windows 7 because I can hear the chimes through the speakers. I have been to the HP page and done the F8 and F5 tips to reset the bios, all this does is recycle the boot process and I get the same result. I was going to put the 310-1125y way but decided to turn it on one more time and and it booted up and I could see everything just as you would expect on a functioning computer....
Chosen Solution I was using my laptop when the screen suddenly went black whilst the rest of the computer showed no sign of issue. Tried to plug the laptop to a tv through a HDMI cable, however the tv reported no signal. Does anyone know what may have happened to the computer and how it might be fixed? Thanks. First, remove the battery cable from the motherboard and press and hold the power button for 10 seconds to drain the capacitors on the board, and see if the issue is fixed....
Chosen Solution I recently replaced my IPhone 5s screen. When i tried to boot it up the screen gets slightly blueish. No apple logo apperas when i let it die and turn it back on. How can i fix this? Hello Maybe you bend it to much the ruban cable try to disconnect all cable but before disconnect the battery and let see otherwise you need new screen Good luck
Chosen Solution Any idea why my sd card reader would work with a uhs-ii sd card but not a normal one?? The normal one works too because it works on a usb to sd card adapter i have. So i have no idea why this would be the case. Plus I dont think I can replace it. I have the xps 15 7590 and i believe that one is soldered onto the motherboard....
Chosen Solution I can’t Format it or change it from readonly There is a Lock switch on the left side of the SD card. Make sure the Lock switch is slid up (unlock position). You will not be able to modify or delete the contents on the memory card if it is locked.
Chosen Solution So driving my truck yesterday I noticed whenever I would brake the truck would kind of work against the brakes and the rpms would jump as I came to a stop. This eventually got so bad that the rpms would dip too low and the engine would die, almost as if the speed was directly correlating with the rpms rather than staying at idle level (~700) when braking to a stop or being entirely stopped while still in gear....
Chosen Solution A small patch of screen on the upper right portion of my Surface Pro 4 constantly flickers. What’s going on? Is this a software or hardware problem? What can I do to fix this problem? Please help me. Thank you. Surface Pro 4 is known for all kinds of issues. A friend of mine has had a very bad luck with is… He had a problem like yours and its was solved with… A new surface....
Chosen Solution Hi all. I recently opened up my Samsung Galaxy Tab E 9.6" to attempt to repair an issue I had with the screen flickering on and off. I followed the instructions on a YouTube video, but I accidentally tried to detach the wrong cable/ribbon. This caused it to snap the ribbon connector to the motherboard and lose screen functionality completely. Upon closer inspection, i appear to have snapped some of the tiny pins that were on the board itself =/ I’m now left with a dead tablet which I only purchased brand new about 6 weeks ago....
Chosen Solution Hi, There was a bit of dust inside my charging dock, and it was so hard to get out so I replaced my charging dock. Now suddenly it says “accessoire not supported”, even if I use different cables and charing ports… What is the problem here? Thanks These questions are too old. It’s from last year @c9679 its a crappy part they bought off eBay. Needs to be replaced with quality one iPhone 5 Lightning Connector and Headphone Jack
Chosen Solution Preface: I have browsed similar topics but haven’t seen this combination asked yet (although I am willing to admit defeat if it has been asked). About 3 weeks ago my iPhone 3GS 16GB began randomly rebooting itself in 10-20 minute intervals. Superficial research led me to believe it was an issue with iOS 4.3.x and the 3GS, so I attempted to downgrade to 3.1.3. I wasn’t able to downgrade successfully (error 3196), so I just kind of lived with the rebooting issue for a few days....
Chosen Solution As of late, my macbook pro 13" 2012 has been smelling really weird after a few minutes of use, several people have described it as chemical, “glue”, or burning but I honestly think it smells like B.O. I disassembled all the machine for a thorough cleaning and couldn’t find anything overtly smelly, but I finally narrowed it down to the black adhesive pad under the RAM slots I think It’s some sort of thermal pad but I’m not sure....
Chosen Solution LG 55" LCD tv purchased in 12/2012. Over the past few weeks while watching the TV all of a sudden there is a flash of light like someone took a photo. Then on the right hand side of the TV appears to be a translucent black band of smoke. Hope the photos help. Thank you, Bill Herold Hi, Does the black band go away after rebooting? was the flash just once?...
Chosen Solution My camera records images but it lags or freezes operation randomly. Is this a common problem? Any clues about how to proceed? Thanks very much, Jim REF: http://www.2cameraguys.com/pdf/Nikon-COO… Look on page 13 of the Troubleshooting section (Page 211 on the PDF). I would especially look at Noise reduction on Page 43 of the manual (Page 159 of the PDF). If none of the suggestions in the troubleshooting help, you can always reset to default settings - see Page 75 of the manual (page 191 of the PDF)....
Chosen Solution I accidentally closed the lid on the arm, thinking the arm had already been secured. Since then, playing multiple different records, the record will play normally and then speed up every few seconds. This results in an Alvin & The Chipmunks-esque sound. I stopped playing records on it after trying a couple to make sure this was happening consistently, not wanting to permanently damage any of my records. Is this a problem with the arm directly or should I replace the needle?...
Chosen Solution I’ve got an early 2013 MacBook Pro that had the Service Battery notification and the battery was lasting about 30 minutes. I purchased a replacement battery and the appropriate tools, left the laptop on until the battery was very low on charge (<5%) and then proceeded to replace the battery. It took me awhile, but I didn’t run into any issues and I got it all back together. I plugged in the charger and it went to orange indicating it was charging and I turned the laptop on and it booted without issue, indicating 58% battery life....
Chosen Solution I have a samsung galaxy s7 model sm-g930w8 and i have to replace the screen on it will a sm-g930a fit on my model In short, no this will not work, you need to order the correct model part for this model of the Samsung.
