Posts

Chosen Solution There seems to be a lot of issues with 7.4.2 version firmware for the Airport Extreme. Mine would lose connection to the disks regularly, and I’d have to restart the basestation (switch off or restart via Airport Utility) to get the connection back. I tried many things to resolve this, but nothing worked and in the end I rolled-back to 7.4.1 and everything is fine now, and has been for several months - much more reliable connection to disks attached to the basestation....

Chosen Solution Anyone have instructions on replacing 99 Suzuki grand vitara alternator drive belt? Hi, Couldn’t find the info for a 1999 model but here’s an image from the 1998 model service manual. Hopefully it may be of some help. (click on image to enlarge for better viewing) it never ceases to amaze me at what one finds with a google search 99 Suzuki grand vitara alternator drive belt replacement

Chosen Solution I have a Lenovo Yoga 2 Pro 13 with a broken screen (touch only works on lower part of crack) and an old Lenovo Yoga 13 (which doesn’t charge anymore but has a fine screen). The screen resolutions of the two models are the same and I am wondering if I can exchange the screen and put the old yoga13 screen on the new yoga 2 pro 13… I have searched for parts names and looked at the lenovo homepage to find if the two models use the same screen (which I kind of doubt) but couldn’t find it....

Chosen Solution Recently, I replaced the 30GB drive with iFlash Solo and 128 GB SD card. Now I notice that the full charge on the battery does not last for more than a day. How long is it supposed to last? From what I found with a quick Google search, the battery should last for 14 hours. Rechargeable batteries wear down over time, so it is normal for it to not last as long as it used to....

Chosen Solution Hi! AirPort Extreme Time Capsule A1470-2TB stopped functioning while it was on, all of a sudden, and without any warning. No light, no noise of HDD spinning, or fan running. I replaced the PSU (power supply), twice. None of the times Time Capsule worked again. Second PSU was fully tested according to vendor. Could it be the logic board? I don’t seem to be able to track any logic board to buy for this product…...

Chosen Solution I accidentally broke off the tab on the connector of a high-speed ethernet cable. A friend of mine said I could just snip off the plug and crimp on another one. Another friend said that replacing the plug would ruin the cable for high speeds, because high-speed cables are so tightly calibrated that a field-replacement of the plug would result in significant micro-differences in the lengths of the individual wires....

Chosen Solution hi, I recently changed the housing for my switch joycons, and after installing on the right joycon, there is no power or lights working on the joycon, and it is not recognized by the switch. when I connect the joycon to the console, I see the console recognize the joycon being connected and the home button on the joycon will work, but no other buttons work and there doesn’t appear to be power in the joycon still....

Chosen Solution right rear blinker not working bulb is good tail light brake light work.take bulb out put back in works for a second then quits again.2012 jeep wrangler sport Try a new bulb to be sure and check for problems at the pig tail connection for trailer lights plug or a broken wire where someone tried to tap in with blue connectors for trailer lights. Hi @brookie1, A problem I’ve run into with taillight bulbs is corrosion in the socket itself....

Chosen Solution I had my s10 plus for a year and I dropped it in water. After I took it out of the water I opened it up and dryed it off. But my 2 camera don’t work T all and my battery doesn’t charge fully. And my phone keep overheating. I replaced the back camera and my phone camera still doesn’t work. Any help? Hi, Even though the phone has an IP68 water resistance rating, after 12 months of use this may not be as effective as when it first left the factory....

Chosen Solution says paper jam but no jam Hey! The reason an electronic circuit will say that the device is jammed, while its not, is because it is being mechanically tricked, or it’s software is failing. Software failure is very uncommon on printers, as you are rarely updating it. Disassembling the Paper feed, then reassembling it will fix your issue if there is no damaged parts.

Chosen Solution I’ve had intermittent screen problems with my HP g4-1015dx notebook since a few months after I bought it. The problems started out as a shimmering magenta “filter” that appeared over my screen. These problems would usually go away after I powered off for a while, and wouldn’t reappear for months. I do not believe they have anything to do with the GPU or motherboard, because external monitors work fine even when the laptop’s built-in screen is on the fritz....

Chosen Solution Please tell me why is my screen flickering on on my brand new acer One 8’ 850 tablet. Just got last night. So when I watch a show it kept doing it. Please tell me what I need to do?? If its new you can take it back and get it replaced for no cost.

Chosen Solution My iPhone 4s has developed a dead spot that is unresponsive to touch input. The strip is about 1/4" in height and extends completely across the screen, at about 3/4 of the way up from the bottom of the screen. I have also had occasions where the entire screen became unresponsive when the phone was only mildly cold (like in my pocket on a 40 deg F day). Thinking that the digitizing screen was at fault, I tore down the phone completely and replaced the display/digitizer assembly....

Chosen Solution My galaxy s9 is acting strange. I can be on it for hours and all is good, but when i put the screen to sleep , the screen wont come back on. The phone still rings and works, but just black screen. If i put the phone in front of an air conditioner, it will work correctly after a couple minutes. It has never went black while im on it, only once i turn the screen off....

Chosen Solution i got coconut oil on the screen of my phone the power button works and i still get notifications i just cant unlock the phone because its not detecting my fingerprints what can i do without buying a new screen?? Service the phone and lCD touch pad connectors and see. most probably phone will be work properly. Try a Soft Reset, Hold Volume down and Powerbutton for 10 seconds, release and the Screen will work again…

Chosen Solution Sears Kenmore Elite. Replaced Shaft & Shock absorbers several months ago & cleaned. Then worked perfectly for several months. Very smooth compared to other washers over last 50 years we have had. Other than a very slight (nothing) clunk about every 5 seconds like clock work. Washes beautifully. Drains perfectly fine. Tub rotates & goes up & down manually. But when it comes to spin, after just a few seconds like clockwork gets UL error, even though it is spinning as smoothly as ever....

Chosen Solution this is extremely frustrating and I am writing this on an external keyboard. My internal keyboard has several letters that need to be pressed multiple times before they decide to appear on the screen. ‘R’ ‘T’ ‘Y’ ‘U’ ‘I’ ‘O’ I’m a writer so you could imagine how I’m slowly losing my mind. I did clean these keys by removing the key and then cleaning out the gunk underneath (without an air dust) and when I fixed it back up, nothing has changed (granted some keys take shorter time to respond than before)....

Chosen Solution Ok so I’ve seen a lot of people post about a caption issue with the mid 2010 Mbp 15” unibody and although that may be the issue I’ve included a screenshot of what I was able to get from the shutdown report. I followed the directions Apple posted to reset the cpu in order to help with power fluctuations and it ran for about 20mins before I tried opening one of my DAWs and it immediately went black screen and tried to restart itself....

Chosen Solution This device was reset. To continue, sign in with a Google Account that was previously synced on this device. DOES ANYONE HAVE AN ANSWER FOR THIS PROBLEM??? I keep a complete log of all my passwords and sign in data for all my devices, and I’ve tried every possible combination on this little menace. Re-setting was a 10 minute snap, but I’m fast approaching 5 HOUR MELT DOWN status on this soon to be $99....

Chosen Solution sim card not detected Try another SIM see if it’s a problem with SIM or phone itself. Going down the path of fixing the phone itself can be costly and tedious. The sim card is working in another phone. I can also see the imei number but it says ‘No sim detected’ Also tried different sim card. Same result. What could be the problem? What do i do next?...