Posts

Chosen Solution Hi everyone, I just bought the 3rd gen battery replacement kit, and the battery seems to be way too long. It won’t fit into the original space unless it is resting on top of the motherboard. Is this normal, because if so, this doesn’t seem safe. Thanks! Hi @kirathelemon , Did you buy the battery replacement kit from ifixit? If so, contact ifixit (scroll to bottom of page to find Contact link) and tell them about the problem....

Chosen Solution I need to replace the coupling on my Ninja BL660 1100. I cannot find one at the parts suppliers. Where can I get one? Same here, that coupler wears out and eventually spins. started with the smaller cups, now the big container has problems too Have you found it? I have the same issue

Chosen Solution Hello! I have an iPhone 6s and i tried to charge it in the car. It stayed for 2 hours at charging and the battery procent showed only 1%. I tought maybe was the car charger’s fault. I took it home, tried to charge it, same problem. Only 1%, and if i take off the charger the device stays on like 5 minutes. I read something on the internet and tried to restore to factory settings, that didn’t work....

Chosen Solution Im dumb, anyway. Can i replace just the cables or do i need to get a new display assembly? Edit: These two You need even more than a new display, you need to use a specific programmer to write screen data, otherwise TrueTone won’t work.

Chosen Solution Can I use a s8 front glass to fix an s9 front glass? I destroyed my s8 but bought a used s9 with a cracked screen but I have a new front glass for an s8 wondering if I can fix the s9 with that s8 glass Hi, I don’t think that it will fit correctly as the phones are slightly different in size. It’s only marginal but it may be enough to be noticeable....

Chosen Solution I replaced power supply board and main board with known good ones. When I first plug it in the red light glows but then goes off when I try to turn the set on. If I unplug it and plug it back in the red light goes on again. No sound. No lines @cruzer46 since you already replaced the power board and the main board, the only thing left would be either the panel or the T-con board....

Chosen Solution Hello everyone. The screen on my surface pro 3 is starting to lift away from the main tablet assembly. Everything still functions perfectly and for now electrical tape and a case keeps things from getting worse but I’d like to add new adhesive. Can someone point me in the right direction for the correct tools and supplies needed for this job? Microsoft Surface Pro 3 Display Replacement Be VERY CAREFUL; this is not a repair for clumsy hands as the LCD panel is extraordinarily fragile and will crack under very, very little pressure....

Chosen Solution My xiomi note 5A screen is broken, please give me a new one. And repear store available in ksa ( Riyadh) my phone warranty is valid till October 2018. go to shop and repair it

Chosen Solution When I turn off the phone’s screen, the page starts flashing shortly, what to do with this problem? From what you have written I concluded that your display is broken and you need to replace it, here is some help: Samsung Galaxy J7 Display / LCD Replacement factory restore, backing up your data for sure. if not might be a hardware problem.

Chosen Solution I fixed my friends iPhone 6 and everything went fine. It was working but the screen didn’t seem as tight to the frame like it does for the other iPhones but I didn’t think of it too much. After about a week the screen is lifting now he said. Did I not push it into the top frame as much when I closed it? What do you think the problem is?...

Chosen Solution Have a LG 47LB650V and a LG 50LB650V. next to each other ( I know I’m a geek ) Story so far…..47" powered up and the 50" in standby mode. Heard a pop from what turned out to be a hard drive power supply on the other side of the room ( not connected physically to either TV ) and at the same time the 47" TV flashed up ‘No Signal’....

Chosen Solution I hit a deer and my dim light on the passenger side is not working. The high beam light still works. I replaced the dim bulb but it still didnt work. The only damage I have is the clear plastic cover is out. Do I need to replace the WHOLE assembly? Is there a headlight motor? What is wrong? You really need a whole headlight assembly if the lens is broken as halogen bulbs and rain water are not at all compatible....

Chosen Solution How do I adjust the trackpad on my Retina MBP? The mouse click suddenly became almost impossible to make happen. If cleaning didn’t help you’ll need to get your system to an Apple Store for repair. Given the age of your system I would think it would be under warranty. There is no IFIXIT guide for the retina models to remove or repair the Trackpad due to the fact you will destroy the battery in the process!...

Chosen Solution I’ve just had a new screen put on my 12.9 iPad Pro. Since I got it back, my Smart Keyboard doesn’t work and closing the cover also doesn’t put the iPad to sleep. I’ve tried changing settings, reloading iPad and resetting it completely. No joy. The keyboard is only a few months old and worked perfectly before the screen replacement (by a 3rd party firm.) is is this a common occurrence after a screen replacement?...

Chosen Solution Hi all, I recently swapped out the digitizer on a S7560M, and since then, the device is stuck in a boot loop, powers up, goes to logo, reboots. I have torn down and re-assembled the device to check connections, all appears ok. Can’t get to safe mode or recovery, I’m stuck. Since this is a fairly new device I can’t find any further info. I have repaired many different devices over the years, and have not had an issue like this....

Chosen Solution All the lights on my hp psc 1410 is blinking at the same time. I cannot use the printer. Can anyone help me fix this problem? thanks Solution one: Reset the All-in-One Follow these steps to reset the product. With the power on, disconnect the power cord from the rear of the product. Wait 30 seconds. Reconnect the power cord to the rear of the product. Press the Power button () to turn on the product....

Chosen Solution My iPhone 5s is stuck on the red battery screen but at the same time shows white square and vertical lines. It refuses to go beyond that screen. Putting it into DFU mode was a non helper as wel. I am unable to determine whether I should either replace the battery, screen, logic board or all of them. Has anyone ever seen this problem before? What solution did you implement?...

Chosen Solution I have removed the screws but can’t get the back off; seems to stuck around the bottom-center. Hi @omnipop , Here are p.8 and p.9 from the service manual for the TV that show how to remove the back cover. hopefully this is of some help.

Chosen Solution Looking for a qualified resource to replace swollen batteries behind screen of first gen surface book. Thanks in advance. Michael It’s a moderately simple replacement procedure, takes about 20 minutes. Here’s how it’s done: Microsoft Surface Book Battery Replacement This kit will give you the tools needed: Essential Electronics Toolkit iFixit is out of the battery right now but here’s one on eBay https://www.ebay.com/itm/New-Tablet-Batt… A reasonable price for the repair would be about $100 in my shop, including the battery....

Chosen Solution I got a new iPhone 7 LCD Screen and Digitizer Full Assembly today. After I replaced the new screen, everything looks good. But when I answered a phone call and held the iPhone to my face, the screen did not turn off. I put back my old cracked screen and that one does turn off when I answered a phone call. Any idea for this issue? Or I should return it to IFIXIT?...