Chosen Solution My phone redmi note 3s prime is not connecting to my Sony Bravia klv-32r512c Plzz give me a ans .. Thk u hey salim, i m facing issue..ny solution u found fr d same…plz share
Chosen Solution It has been almost a month since I last worked on the Moto Z 2 Play and the last repair seems to have succeeded. After damaging the original screen on an earlier attempt, I installed a new screen using B7000 adhesive. For a clamp, I stacked two spare 3.5in hard drives on a piece of packing foam to weigh down the screen. After letting it sit overnight, the phone powered on successfully and the screen has stayed put since - a much better bond than the adhesive strips gave....
Chosen Solution I am trying to replace my battery in the Moto360 Sport. I replaced the battery, however the screen does not show anything. It vibrates and the screen gets bright, but nothing else. I made sure everything is connected. Does anyone know what may cause nothing to show on the screen? I’m thinking I broke something with the battery replacement however I see nothing out of the ordinary. I’m leaning towards testing the battery with a multi-meter somehow....
Chosen Solution I am corrently changing my Ipad Mini Touch Screen Digitizer. The problem is just that, it is not like the ipads i can find guides to. It is an ipad mini 2 Retina Display Wifi/Cellular A1490. When i try to take the screen out, it’s like something in the top, holds it back. In the videos i find online, there is nothing holding it in the top. Can somone help me to find a guide?...
Chosen Solution Hello guys, the SD CARD port on the 21.5 iMac late 2013 stop working. It doesnt read any of my cards. Can this be fixed? Perhaps replaced? I hope i dont need to change the whole logic board. Best to get a USB adapter unit. The SC card unit is part of the main logic board assembly and not serviceable as you can see here:
Chosen Solution Sim card stuck in slot deep Xperia z5 Not on the sim tray Iv got that out I didnt know what it was for Last time this happened to me, I stabbed the sim with an exact knife and pulled out slowly. Took a try or two but worked If the phone doesnt have a push/pull configurations, then the sim wouldve stucked inside a tight space. To remove the micro sim, you will need a small piece of metal that can slip into the micro sim slot and then push it outside so that it would go out....
Chosen Solution Hi My mac book is just 10 days old, my phone fell on the touch bar and it got cracked. although the crack is very small and not noticeable but touch bar is not responsive, only 10% of the touch bar is functional rest is not responsive. any idea if this will be covered under warranty or how much it would cost to get it repaired from apple / third party?...
Chosen Solution This just started with my Jeep it starts fin no problems drive for 10 to 15 min the car will die like out of gas the car cranks over but may take a few min to start up This is random Robert Pendleton if you can, get the OBD scanned and see if it throws any codes. On my 2000 with a 4.0L engine it was a defective fuel pump which caused similar issues....
Chosen Solution hi everyone, so my iphone touch screen wasnt working unless i apply some pressure on the top of the screen, so i opened the iphone to see if there was any loose connections, there was a loose connection, when i was reassembling the phone the number 1 connector snapped out and the screen turned off, then i reconnected it and it worked again, then when i was reassembling it, it snapped out again, but this time i cldnt make it work again, i tried hard resetting and disconecting the board from the battery, but with no luck, it can connect to itunes i can hear sounds the vibrate button works, but it doesnt show as a camera on the computer, what shld i do plz help ty in advance :)...
Chosen Solution Hoping to find a solution before donating this beautiful display. My friend gifted this display to me, it worked for one week with my M1 MacMini w/ USB-C thunderbolt adapter, and then the frayed cable started causing issues, I would wiggle it to turn it back on; it worked for another day. And then the next day it would not turn on at all. When the thunderbolt cable is not plugged in, I noticed that the USB ports on the display would have power to them(can charge iPhone, but no data connection), but once I plug in the thunderbolt cable, the USB power would go out....
Chosen Solution I just replaced the screen on this laptop and now I am having trouble choosing an adhesive to use on the bottom edge of the laptop where the plastic frame attaches? Any suggestions would be greatly appreciated. Low tack double sided tape if you insist on replacing it. You will be fine without it, but the part of the bezel with the HP logo may appear loose without any used, but it’s cosmetic and only matters if you care about looking passably stock....
Chosen Solution I just finished swapping my screen after two cracked ones and a malfunctioning one. After these three fixes, everything was working perfectly fine (except for the screen on the last two changes; bought from the wrong person I guess). Now, after putting in the newest screen (and having to readjust the cables as one wasn’t in all the way, making this newest screen malfunction…) Touch ID is no longer working....
Chosen Solution Alcatel one touch p320x repair display touchscreen Hi, Here’s a link to a video that shows how to change the touchscreen (digitizer) on an Alcatel One Touch P310x. I realize that it is not your exact model but hopefully it is close enough to be of some help. Replacement parts are available online. Just search for Alcatel One Touch Pop 8 digitizer to get results for suppliers. Here’s a link to just one supplier....
Chosen Solution So I was cleaning my iPhone’s loudspeaker, and it got punctured, or better, in the hole I was cleaning there is no more any grill, I have tested the audio and I can’t hear any sign of distortion or any problem at all. Now, I already know I have lost waterproofing, but will dust enter the speaker and will it cause problems? How can I do to mend it?...
Chosen Solution I replaced the battery in my wife’s Iphone 5s. After the installation of the new battery I performed a hard reboot as per the instructions. The phone now stays on for 5 to 10 minutes then reboots. After rebooting the battery level will fluctuate by large amounts. On the 5s it’s vary common to knock of the SWI filter behind the battery connector which will cause phone to reboot as it’s not reading the data from battery....
Chosen Solution what do i need to take off (and how to do it) to replace the 6” hose from rotator head to handle? Replacing embedded hose in power unit on Shark model NV752 Update (02/22/2020) Replacing embedded hose in power unit on Shark model NV752
Chosen Solution I have a sony z2 with a cracked screen. The lcd display works but not the digitizer. Would it be easy to just replace the digitizer or the whole lcd as well? Change the whole LCD with digitizer assembly is more easier. Here is a blog showing how to replace Z2 LCD, hope it does help. http://www.witrigs.com/blog/how-to-chang… To replace the whole screen is more easier. The whole screen includes the glass, digitizer and LCD screen, all of them are bonded together tightly by the help of very strong adhesive, and it is very hard to separate neither of them for individuals....
Chosen Solution Replace the LCD display Mac pro book Model #A1398 need part description and cost ? Here’s the needed part (B-Stock) MacBook Pro 15" Unibody (Mid 2012) Display Assembly and here’s the guide to put it in MacBook Pro 15" Unibody Mid 2012 Display Replacement
Chosen Solution Hi Everyone, Will try to get straight to the point. While trying to add an additional drive utilizing the optical drive of my late 2008 Macbook Pro 15” I noticed some odd behaviour after installation: The fans run high constantly - even after NVRAM and SMC resetWhen shutting down via finder the machine boots down and then turns on again on its ownThe machine also boots up automatically when the magsafe cable is connectedThe wifi and camera does not work - Bluetooth works After close inspection I noticed that the isight/wifi/bluetooth cable that connects to the logic board maybe damaged which maybe causing these issues, based on what I have read elsewhere: https://forums....
Chosen Solution I have the same problem as these guys. Front and rear camera, flashlight and earpiece not working What part do I buy? disconnect the battery and check the lcd, speaker, n the home button connect properly
