Chosen Solution I own a Samsung 2013 F8500 Plasma 60” tv and it no longer powers up. No red blinking indicator light, nothing. It was showing signs of this over the past week when it shut off, but after I unplugged it and plugged in again, it worked. Few days later it went off at night but the next morning it came back on by itself and remained on all day before deciding it was finished and then died....
Chosen Solution My SanDisk Extreme Pro 2TB advertised at 2000MB/s reaches less that 1000MB/s with Blackmagic Speed test on all ports of my Mac Studio M1 Ultra using the supplied cables. . I’m very upset! Yep! Using the supplied cables will only given you that! You need to get a Thunderbolt3 cable to get the better performance. SanDisk does not make note of that in their docs or even on the package that you need a different cable to get the full performance....
Chosen Solution After replacing the connector/jack part, my phone worked except the front speaker (up). So I reopened the phone to check what was going on and discovered that the ribbon of the front speaker/camera/sensor was damaged. I removed the whole piece and ordered a new one (not yet here) but now the whole screen doesn’t work. In addition the vibrator button doesn’t work either (or at least I don’t get the vibrations whenever I turn it on/off) The phone is visible on iTunes....
Chosen Solution No power, no data the power supply is working fine have you checked reseating removable parts? like ram hdd pcie slot graphic card , i have had a similar problem but with the hdd i have switched to a ssd and the problem was fixed for me.
Chosen Solution Earlier I noticed I heard a rattling sound but I’ve looked it up and the only answer I have is that it’s a loose screw or plastic but honestly it sounds like the whole inside system is moving it also makes the controller vibrating louder than the left side. It still works but I feel like it might damage the insides if I shake to hard. It also doesn’t sound like a loose object because it’d be moving in different places....
Chosen Solution After replacing my digitizer, I proceeded by wiping the lcd with a microfiber cloth. I think I wiped a bit too hard and there are faint white spots when displaying something with a black background. Is there any way to fix this? Those could either be pressure points meaning something is under the screen pushing up on it or it could be a defective LCD. If you can get that screen off in one piece as those spots disappear then something is putting pressure on the display....
Chosen Solution Greetings, I recently got a Nexus 7 2nd gen to repair and it is constantly rebooting and the power button wasn’t working. I changed the power and volume buttons strip, and now the button does work, but the tablet still reboots. Here is the troubleshooting I did so far: Looked for any damage or dirt on the motherboard (there isn’t) Unplugged and plugged back the battery Tried a factory reset via unlocking Re-flashed the boot loader The tablet reboots about every 8 seconds, so it looks like the power button is stuck, but physically, it isn’t....
Chosen Solution I have broken 1 pin of INTEL LGA 775 for the DG41RQ BOARD. DOES IT REPAID. PLEASE GIVE ME THE DETAILS INFORMATION If a pin is bent, it is possible to repair, but it is very tricky since they are so small. I was able to use a sharp X-acto knife with a magnifying glass (and good light) to carefully push a pin back into shape. If a pin is broken off, there might be hope, depending upon what pin it was....
Chosen Solution I replaced a cracked digitizer, I used Kapton tape as instructed, and now I’m testing it to make sure it works before I stick it together. When I first pressed the power button it booted up with the white Apple against the black screen. Then it went to the wallpaper screen. Then it went black like it powered off. I plugged it in, waited a couple minutes, then turned it on....
Chosen Solution someone told me that it could be my air pressure sensor I want to know is that the mass air flow sensor because when i look up air pressure sensor it comes up tire pressure sensor Have the refrigerant level checked. It needs to be precise for it to work properly. They measure the amount the system has at the ford dealership
Chosen Solution After a reverse polarity situation while changing the battery, be careful who you allow to work on your car, replaced burned fuses under dash and under hood. Couldn’t find fuse to radio and trip mileage,etc. Is there another fuse not shown in service manuel perhaps Radios have their own fuse installed on them also. Take out your radio, and look at the back of the unit, you should see a fuse there....
Chosen Solution The white plastic assembly attached to the motor shaft is broken, this is the part that drives the blade assembly. Is this a replaceable part by itself or just come with the motor? Model CSB-76 If the plastic itself is broken, save yourself the hassle and duct tape it, or replace the entire thing. Other wise you can get the other parts separate. For more info: Cuisinart Smart Stick CSB-75 Repair
Chosen Solution Hi team, I just have a simple (and may be newby) question? As all my live i’ve been a windows pc user and fixer. So i’m not very into mac. In normal (pc) laptops it’s quite recommendable to replace once a year or once every 2 years the thermal paste of the gpu. But not sure if this is necessary or even recommendable in Mac? (As i know the cooling system, normally, is much better and eficent in MAC) Well that’s all....
Chosen Solution Hi, I have a Samsung Galaxy s3 that the screen went black. The phone is still like new but, went black. I want to know what I need to purchase to fix the screen. Screen digitizer, Lcd or etc., thanks. It looks like either 1 of 3 things… I’ll place them in order of good to bad news. The connection from the Digitizer to the Motherboard worked loose somehow....
Chosen Solution When I lift the lid 3/4 of the way up the display is fine. When I lift up the display lid fully then there is a huge amount of flickering. Do I need to adjust/change a cable or do I need to replace the whole display screen? From what I can tell in the guides, you’ll need to replace the whole screen as the cable is soldered to it....
Chosen Solution I have a Panasonic DMC- FZ7. The problem is that I get a message come up saying that there is an error with the card and to check it. I have the SD card which it says is compatible in the manual. I put the card in my laptop and other camera and it works fine in them. But once I put it in this camera, it sort of freezes and doesn’t let me go on the menu or take pictures or anything....
Chosen Solution Everything else is working fine but I am unsure how to replace the jack to plug it into the computer. Thank you and any help is very appreciated! John Fl the jack replacement is pretty much the same way as any other headphone jack. Check something like this guide How to Replace the Audio Jack from step 5 on. It is actually pretty straight forward. Only issue with yours will be that you have more wires so you need to mark the wires for their respective location to be resoldered....
Chosen Solution This happens to me on a regular basis. I get a phone in, its working fine except for a broken screen. I change the screen (Disconnect battery of course) put it back together and BANG! Phone is disabled, try again in 1 hour. I did not enter any passcodes at all. I turn it on, after the apple logo I get “Try again in 1 hour” That in itself is only 1/2 the problem....
Chosen Solution I have only two slot and each one have 0,5 GB of RAM. I want to increase the RAM what I should do? Are there only dome kind of RAM compatible with the PC or I only have to use two RAM of the same type? thanks you! Giovanni Riva, all this will depend on your motherboard. Some will take different memory size, others will not. I would replace both of the modules with the largest memory that your motherboard will accept....
Chosen Solution It is the 2.66 GHz Core i7 model. I say it is not the OS because it crashes with two different OSX boot disks and during OSX recovery mode. Have tried the following: Sent it to a shop to have the bad capacitor on the logic board replaced. I previously had the capacitor overheat issue but the symptom was different: under GPU load the laptop rebooted. The current symptom is a complete power down: it never powers back up to show a panic screen....
