Posts

Chosen Solution I just replaced my early 2013 macbook pro’s battery and magsafe connector, and now the computer will not turn on. The charging cord does not light up when plugged in. What steps should I go through to troubleshoot? The interior was very dusty when I opened it up, I used compressed air on all the parts when the logic board and speakers were out. Could some dust have lodged somewhere?...

Chosen Solution Please help, my little brother replaced my dad’s iphone SE (1st Gen) battery and now it won’t show on laptops when connected and it only displays a black screen. If the phone is not fixable, it’s not the end of the world but he really would like to retrieve his data, he has tons of pictures on it he didnt back up. From what I understand they went to a small repair shop and the guy performed a couple of tests to see if the phone was dead....

Chosen Solution Phone was working fine and then it stopped being able to make calls. I was able to use the Wi-Fi network and make texts and then soon after I started getting the message restricted access change voice service blocked I talked to Verizon store and they were unable to diagnose what the problem was Here is an article on it. In short, its a feature not a bug. http://valuestuffz....

Chosen Solution Hey y’all, whenever I try to play my Nintendo Switch in handheld mode, the right Joy-Con does not connect. The Joy-Con will charge when docked, and can play wirelessly just fine, plus the left Joy-Con has zero issues. I’ve tested two seperate sets of Joy-Cons, the issues are persistent. The issue is with the Switch itself, not the controllers. Joy cons don’t work very well. My red one stopped working....

Chosen Solution The right top of the screen is much darker than the rest of thr screen, happened after replacement. Please help to fix the Screen has a row of LEDs at the top of the LCD thatshine into a few layers of diffuser film, causing the backlighting effect. its an older, and cheaper way to make screens, but it works. the right side of the LED strip is likely faulty, and you would need a new screen to fix the issue....

Chosen Solution My S20+ port got moisture problem, so i bought a replacement charging port on ebay. here is with i found disconnecting and connecting OG charging port fix the moisture problems but randomly happen again in between 1 to 3 weekI get no network if i boot with replacement charging port.If i boot up with OG charging port, then change it to replacement charging port. everything works Till i restart the phone why is this happening?...

Chosen Solution Is it easy to replace the screen of an iPod Touch Hey Thierry, iPod Touch 2nd Generation Display Replacement Go for it. It does say it is difficult but hey that’s a challenge. Get the right tools, (it tells you on the guide) follow the steps, and have patience. If you do it how it says then you get back a new iPod and a great sense of achievement!...

Chosen Solution My iPhone 6 screen became very dim to a point that, I have view the screen with a touch light, what would cause that anand how can I fix it Has the screen ever been replaced? Could be as simple as your backlight going out. A new screen would fix it if so.

Chosen Solution Hi, I recently dropped a weight on my phone at the gym causing it to crack the front screen and then also the back. I can only press the left hand side of the screen but nothing else will work. I can’t login into my phone at all because the screen won’t work. Am I still able to get my screen fixed if the back is cracked to?...

Chosen Solution I have a Mid 2007 iMac with a serial number that is Unavailable. Ive tried to obtain it in multiple different locations, everywhere it says that it is unavailable (terminal, about this mac, system report..) I’ve reinstalled twice and had no luck. I was reading that it is probable that the Logic Board had been replaced previously and the tech failed to reassign the serial, this is possible, as I am unaware of its past life....

Chosen Solution I have an 06 Quest when i last drove it, I was going up a slight incline at 60 mph. I heard a small metallic sound and the Quest lost. Power and died. It would crank but not start. My mechanic said I threw a timing chain. His repair quote was about $3600. My question is, if the plastic clip holding the tensioner broke. Would the repair be as costly....

Chosen Solution My s7 edge doesnt fast charge and wont connect to any pc saying it cannot be recognized. Should I replace the charging port? Or is there any fix where i wont spend any money? First of all check the charging port for any debris / gunk buildup inside, if there is clean with fine tweezers carefully as this stops charging cables from plugging in fully. Try other charging cables if you haven’t already as well....

Chosen Solution I picked up a used Lexmark CS417dn for occasional color printing (I don’t need to all the time, but it’s become more of a need then I had ~10 years ago). I am aware the “return program” toner will usually stop Lexmark printers (or at least, lock out color and go to B/W only) due to the chip programming. But say when I eventually get rid of them (they’re fairly common because most people see the ~$25-50 savings and give into the “return program” scam) and swap for standard toner as needed, can I put the printer into a “override out” condition where the toner levels are disregarded like what the HPs offer?...

Chosen Solution Hi I can find 2 the motor mounts looking at the engine when the left one right. I can’t find the location of the 3 motor mount under the engine? Also I can’t find the torque strut location. I don’t have a schematic look at is there where I can purchase a schematic on the location of these items. Thanks Cecil The 3rd engine mount is more often called the transmission mount....

Chosen Solution So tonight I had my Sony xbr65x810c TV on and I walked out of the room for 5 minutes and I came back and I was getting a red light blinking 3 times. I did a little research online and I unplugged it from a power strip, turned off my wifi, and unplugged everything that was going in to the TV then plugged the TV back into the wall outlet and I will now barely and very dimly see the logo for a split second as the TV starts up and the it goes completely black and now I am constantly getting the red light blinking 6 times....

Chosen Solution A phone came in that won’t turn on. The battery was punctured and it smelled. After I plugged in a known good battery, charge port and screen and connecting it to a charger the amp draw is exactly zero. And sure enough C5202_rf says pp_vcc_main is not shorted to gnd. I don’t know what to do next, what or where should I measure. I’m thinking it might be PMIC but I’m still fresh on board repair....

Chosen Solution Hello. I Have questions on RAM upgrades. I Have Macbook Pro 4.1 (early 2008) Core 2 Duo 2.6 GhzRAM 4 GB 667 MHzLCD 1920 There is no answer if you can put in 2x4 GB RAM SO-DIMM’s. And, why the system bus is 800 MHz yet the memory is 667 MHz? Update (11/06/2017) Can I insert DDR2 6400 800 Mhz SO-DIMM’s? FSB SPEED 800 MHz, Why Apple need 667 MHz RAM?...

Chosen Solution Hi looking for some advice, I purchased a set of iPhone 7 screws for the whole phone but I’m struggling to identify which one goes directly into the back home button. Is there any way of finding out what one it is. As the one I have in the phone hasn’t got one and the home button keeps flicking out of the screen. thanks in advance p.s i don’t have any special measuring equipment so if it can be done without it please let us know....

Chosen Solution Receiving System error 1018 to call service. Unplugged and waited 5-10 minutes, machine still doesn’t work. Thank you, Camille Kutis @corkie The following message is displayed on the LCD: “SYSTEM ERR 1018 Call service!” The error is a Flow sensor fault. The solution is to Replace flow sensor. You can download the service manual from this page ResMed VPAP Auto 25 Repair to work on your CPAP. Ultimately you do want somebody (preferably a BioMed person) look it over after you do your repair....

Chosen Solution I cracked my iphone 5s, and I went to this guy to fix the phone, and when he fixed the screen, it looked fine. But then i realized my touch id wasn’t working, and neither was my front facing camera. He said to just bring it to apple, but I thought it might be a settings problem, so I reset to factory settings. but when the iphone restarted, the apple logo remained on the screen for a long time, and then a red screen kept showing up....