Posts

Chosen Solution Help can’t get screw out to replace cracked screen Is the screw spinning or not turning at all? A lot of times it’s the screw spinning, one way to get it out is either use a thin pry tool such as a spudger or suction cup to lift the screen up slightly from the bottom and try taking the screw out. It can also be the screw posts which have screw holes in them that have broken off from the bottom of the screen which in this case the screen can be removed (note there is quite a bit of adhesive around the edges of the screen making it harder to remove....

Chosen Solution I have a iPhone 5 that had a battery problem. My screen popped out of its housing because the battery was expanding. I replaced the battery as well as the screen because it had been damaged by the expanding. I bought a new battery from a trusted online store. It’s called MyTrendyPhone and operates in Norway where I live. I also bought a screen on eBay. Everything worked out well and it has lasted for many many months....

Chosen Solution Hi everybody, I really hope to get some help here… I have updated my device (Alcatel OneTouch Idol 3 5.5") to the latest Android version released by Alcatel OTA a few days ago : 5.0.2-010 08 Since the update I am having serious problems with my Alarm app and with any other Alarm app I have tried. I notice 2 main problems : The alarm icon vanishes from the notification bar as soon as the app is removed from the “recent apps rack”, thus, the alarm doesn’t go off....

Chosen Solution After starting my Imac normally , it won’t boot making a 3 beep sound. After doing a research I understood that it had a RAM error. I removed both modules and I installed only the left or the right module in the left slot and they worked whereas they didn’t work when installed on the right slot. Also, they worked just once or two times when installed together, but then again after some restarts the same loop continued....

Chosen Solution I have a 2008 Altima. Only the driver side window works. I used my key faub to get lower both front windows but only one will go back up. How can I raise the other window and what could be causing three of my windows to suddenly stop working? Hi @moshe1210 , Have you checked that the driver side Window lock button is not operated? If this button is operated it prevents all the other windows from working....

Chosen Solution So, I’ve got a late 2011 15" unibody MBP with an “irreparable” logic board. (“significant trace damage.”) A buddy of mine has a mid-2012 15" unibody with a detached display. (not sure how this happened…) Assuming that whatever detached the display did not damage the display socket on the logic board, can I just drop the mid-2012 logic board into the late-2011 casing? Actually, now that I’m thinking about it, is the top case cross-compatible, too?...

Chosen Solution I have a A1502 I bought 2nd hand. It has been working find for about a year. Then it booted up one day and showed the flashing folder with ? that indicates it cannot connect to the ssd. I start up in recovery mode, and ssd is not seen in disk utility, or in startup disk. I can boot from an external drive (USB) or target disk (thunderbolt), so it seems the logic board is working fine....

Chosen Solution Hello, I have and IMAC EMC no 2638 which i bought with 256 gb flash disk. And today i opened the imac to add an SSD hard drive to increase the storage. But when i opened the Imac i saw that because my imac did not come with a hard disk it had no sata cable or power cable to plug the hard drive. So when i tried to find a compatible sata and power cable to connect to the logicboard and to my ssd hard disk i could not find it anywhere....

Chosen Solution Recorded 2 days of conference recently and found afterward that after 11 minutes into the recording the video portion goes blank but the audio is still working. It like the camera went to sleep but still recorded all the audio. There were about 15 session and this happened to all 15 session. Is there something I can change on the menu to allow continuous video recording? Hi, What is the capacity of the removable memory card (SD or SDHC card) installed in the camcorder?...

Chosen Solution Help! My Razer Blade stopped turning on out of nowhere. The light on the power adapter still turns on but non of the lights on the laptop turn on. I have tried the basics such as holding down the power button for a couple of seconds and removing the battery and plugging in the power adapter but nothing has work so far. If its the mother board is there somewhere I can get a replacement?...

Chosen Solution If I buy a new one, which models should I buy in order to install it on the existing clamp. Because existing one is 1.8 cu feet, can I buy other dimensions , if so will it fit existing clamp. Can someone suggest good microwaves that fits existing clamp. Measure the dimensions and take those to your local appliance dealer along with your tape measure. The 1.8 cubic feet is an internal dimension, not an external and models will differ....

Chosen Solution The motherboard for this older MacBook is fried and I want to recover the data off of the SSD. Previous searches made it look like there is no readily available adapter to convert the SSD into a USB to plug into my new MacBook. Have their been any breakthroughs in 2020? My question and the answer from @danj tells you what you want to know: Is This Tool Really Necessary?...

Chosen Solution Family friend dropped their phone into water whilst on holiday. When they got back I had a go at taking it apart, drying it out properly etc but no luck. The phone itself is a write off and they’ve already got a new one, but I am trying to get it running long enough just to get their holiday photos off of the device. They don’t have hundreds and hundreds of pounds to spare so going to a professional is not possible, but I am happy to chuck some money in to get replacement parts....

Chosen Solution Screan is brightness is very low djamexmela93 if your computer is a Dell 700m then you need to remember that it is a CCFL backlight. Your computer will have an inverter to power it. In your case it could be a bad inverter or a bad CCFL (most likely). The CCFL is in the display. Something like this video will help you to remove the screen. After that you will have to take the panel apart....

Chosen Solution this is the second screen which get loose. why. regard georg If the screen is coming loose then that can be down to a coupleof factors which I’ll list below: The screen wasn’t ‘clipped in’ in the first placeThe battery has swollen and will not allow the screen to clip in properlyThe internal housing is damaged, preventing it from securing The first instance is very easy to sort, you simply have to press down on the screen until you hear a clicking sound, which means your panel is now secured and should not come loose....

Chosen Solution Does the screen replacement kit include the actual adhesive to bond the new screen to the device, or is it sold separately? Apple Watch (42 mm Series 3 Cellular) Screen Apple Watch (42 mm Series 3 GPS) Screen The kit comes with the following: New Ion-X ScreenForce Touch Sensor Adhesive Gasket to attach the display to the case You will likely need: Apple Watch (42 mm Series 2/3) Display Connectors Sticker Set as well Review this guide: Apple Watch Series 3 Screen Replacement

Chosen Solution My screen is broken with only a horizontal line in between while whole of the screen is working but the only problem that i face is that it works occasionally sometimes it suddenly starts taking touches and sometimes it will stop taking touch for days… How to reslove this problem is there any connections inside that i should check for? Hi, You will have to open the phone and check that the display assembly LCD screen and touchscreen cable connection to the systemboard is secure....

Chosen Solution Hello friends, I have issue with macbook pro retina mid 2014 13”. The problem is the fan runs high and the mac is runs very slow. I used the iState program and you seed the picture from board and program. please help me. Clearly you have corrosion damage! You’ll need to clean the area and you’ll likely need to replace the components that are damaged. Do you have a rework station and SMT soldering skills?...

Chosen Solution I have a Samsung rsg257aars side by side water dispenser will not stop dispensing. I heard that filter not sealing can cause this. I replaced the filter and it work fine for a few days then started again. I also tried a Samsung brand filter ($50 from Lowes) still no luck. I am thinking about replacing the filter housing next but I wanted to check here before shelling out another $70....

Chosen Solution Today, I decided to upgrade my computer’s hard drive, I have an 800Mhz Solid White iBook G3. It had a 20GB drive, that I upgraded to 40GB (not a major upgrade, but i was running out of space) After the painstaking process of getting the thing open, and installing the drive, I installed OS tiger, and opened Disk Utility. When i got to the drive, it showed me the following message “This Drive Has Reported A Fatal Hardware Error To Disk Utility” and the S....