Chosen Solution I had my LCD screen fixed a few months ago and I tend to drop my phone a lot. So i had my phone and it was working perfectly fine and then i shut it off completely then i turned to back on later and the white screen with the apple logo came on then it went red and then faded and I did a hard reset multiple times but it just keeps doing the same thing....
Chosen Solution is there a way i can check the sencor on the tv No simple way to check sensor as it could be the sensor, the connection to the circuit board, or another component or subassembly damaged. Did you replace remote with exact copy, or use a universal remote? You may want to try more than one universal remote, note that if you have cable or satellite, the included remote may be programmable as a universal remote....
Chosen Solution Today my Phantom 3 Standard crashed on the ground. This resulted in the camera being vertically flipped (DJI logo is on top upside down). How do I get the camera off the gimbal, so I can turn the camera and put it back on? I had the same problem and fixed it. I assume you’ve fixed yours by now. If not contact me at mikewade54@sbcglobal.net and I’ll walk you through it...
Chosen Solution I recently received a xiaomi mi 9t/redmi k20 with a broken screen from a friend. I ordered a replacement display+frame and installed it without any problems but the phone wouldn’t turn on. I thought it might be because the contact pads for the power button were slightly off so I disassembled it and reassembled it again. When I plugged it into my PC’s USB port windows gave me a message saying there was a power surge on the USB port and my device was drawing too much power....
Chosen Solution The HDD on my 120 GB iPod Classic (6th Gen) recently went bad, so I bought a Tarkan iFlash (ZIF to CF to SD) adapter and a 128 GB SD card off his list of recommended cards. At the suggestion of many, I also bought a replacement battery from ipodbatterydepot.com. I’ve installed both, but things are not working as expected. When I turn HOLD off, nothing happens. When I connect the iPod to my computer (Windows 7) with HOLD on, nothing happens....
Chosen Solution I had to replace my HDD fan today and when I went to gently pry the airport cables from the card, two of them completely took the metal connector with them, rendering the card with just one connector now. :( Will the iMac work without that card? It’s more devastating if it does bluetooth AND wifi. I have ethernet, but I need bluetooth. Can I somehow put the metal connectors back on the card?...
Chosen Solution Hi Before: iPhone X broken Screen 1st screen replacement: boot every 2 minutes (can do everything in iOS, screen works as expected) 2nd screen replacement: same story as above. iOS is updated to latest version A general rule of restart 1-2 minutes is caused by lack of gas gauge data possibly caused by bad battery connection. I would check if you have battery data using 3utools you can download this for free it’s a very useful program....
Chosen Solution Hi! I’ve recently discovered that you can repurpose an old laptop’s screen. So since I had an old dead Toshiba Satellite L50-A-1CU lying around I decided to extract the LCD panel and make it a new display. Now, I’m not exactly the type of guy that knows the insides of computers like the palm of my hand. But still, I was able to extract the LP156WH3 TL S2 LCD panel....
Chosen Solution So I replaced my iPhone 6 Plus battery 3 days ago and the Battery health Maximum capacity shows still the 64% which I saw before and it also shows that it is significantly degraded now. I tried restoring through iTunes , draining the battery to 0 and then charging it to 100 but had no luck. Because you do indeed have a computer capable of running macOS, let’s do some testing of the battery....
Chosen Solution I have a Samsung Galaxy A51 which is stuck on the charging icon (lightning bolt). It shows no battery percentage. I tried replacing the battery and charging port but the problem remains the same. There is no liquid damage inside the device. Is there something I haven’t thought off? Or is it a main board issue? I also tried force restarting the device with the volume - and power button...
Chosen Solution Drain pump cover broke and drain clamp let loose leaving entire load of laundry water everywhere. I can easily replace.the drain pump cover; but I’m thinking that may be a symptom not the cause. How can I tell if there is something else is wrong that is the cause (like shocks if it has them) that needs to be replaced? I note there Ppear to be 4 springs on the corners of the drum that I am guessing are shocks....
Chosen Solution All of a sudden my PowerBook screen when black. I tried booting up and hear the tone, but nothing comes up on the screen. Does any one have any ideas? You want to try and reset the SMC and the PRAM first. This is done by first shutting down, removing all peripherals and the battery then holding the power button for 5+ seconds (SMC rest). Afterwords boot holding the command, option, p, r button combo and hold them till you hear the startup chime happen 3 times....
Chosen Solution I just replaced the battery on my iphone 6. did it while following a video… everything seemed okay. I removed the screen when I replaced the battery to avoid messing it up from what the DIYers had told me that would be best, so I took the screen off thinking that I’d avoid messing the screen up but now the screen is totally &&^&@@… its got lines running all through the screen and nothing is legible, and the touch doesn’t respond....
Chosen Solution So I replaced my screen for iPhone 7 and it turned on for a second to show me it was dead but it’s been plugged in for a couple hours won’t turn on now I would try doing a hard reboot first. Hold down the volume button and power button until you see the Apple logo. If that doesnt work, try plugging it into your PC or Mac to see if it’s recognized....
Chosen Solution Does anyone know if iFixit sells a size 0-1 Y tri-point screwdriver? Hi @mezzbark Are these what you need? Tri-point Y0 Screwdriver Tri-point Y1 Screwdriver Update (11/06/2018) Looks like you’re out of luck if you only want Tri-wing screwdrivers in a kit or that you need both Y0 and Y1 screwdrivers. Here’s the only thing that is close and it has screwdriver “bits’ not full screwdrivers This kit incudes Y000, Y00, Y0 and Y1 Manta Driver Kit - 112 Bit Driver Kit Here’s a link to all their tools so you can hopefully find something that suits you....
Chosen Solution Roughly 7 hours ago, phone possibly got a few drops of salt water in it, as it was in the back pocket of a chair on the edge of the water. After that happened, my speaker completely stopped working and my headphone jack started doing things it should when it was plugged it (moving volume up and down without touching it and constant static. When I tried calling someone else’s phone, all they get on their end is a staticy sound, however, speaker phone works fine....
Chosen Solution the volume control on the side of the phone will only turn down and I can’t find a control in “settings” to turn in back up There’s a dome underneath the volume key on the droids that will sometimes get metal shavings underneath it. Follow the guide for taking the droid apart and check the dome under the volume up key after you get the back housing off, being very careful to remove the dome and sticker as one piece, since you’ll have to put it back on....
Chosen Solution Yesterday my phone lost connection to the mobile network. After restarting, resetting network settings then performing a DFU mode restore in iTunes. I have the same issue. Is my phone dead or is it fixable? If so what do I need? Thanks Tom iPhone X board is extremely not fixable for DIYers due to the sandwiched design. Find a professional board repair shop, don’t try to do it yourself....
Chosen Solution Nick Ivanov’s Instructions on How to Replace the Headlight on a VW Beetle are for the 2002 model; mine is a 2000. Are there any differences between the 2000 and the 2002 model re: headlight replacement? casaelmilagro , the link below is for 1998 to 2005 Beetle headlight replacement, video will show clearly how it is done for your car. Good luck. I hope this helped you out, if so let me know by pressing the helpful button....
Chosen Solution I’ve got a late 2013 iMac which was ordered with a small SSD instead of the HDD or Fusion drive. I want to install a 2TB 2.5” SSD, but not sure what to expect when I open it up. Will it have any of the following inside? Mounting bracketsSATA cableSensor cable Thanks for any help. I would start off getting this kit iMac Intel 27" (Late 2012-2019) SSD Upgrade Kit Then you only need the logic board SATA cable 27” iMac SATA Hard Drive Combo Cable, Apple P/N 923-0312 Here’s the guide to putting it in iMac Intel 27" EMC 2639 Hard Drive Replacement You will still need to lift the logic board forward so you can get behind it to clip the SATA & Power cable ends in....
