Posts

Chosen Solution I dismounted this part (separating it from the motherboard) as the guide show, but now I need to see clearly how to connect the this part to the motherboard. Thans Update (03/14/2020) Thank you for your reply. According to your explanation I see that I may have made a big mistake while trying to remove the connector and I may have broken the connector. The cable has come loose and the base has peeled off from the motherboard....

Chosen Solution The display on about a little more than an inch of the right side of my screen works only sometimes. The touch part always works. For example, the right side of the screen can be black but if i have memorized the location / order of the apps, then i can guess where to touch on the black part of the screen and the app will open. Sometimes that side of the screen has full color, sometimes it is completely black, and sometimes it has lines and distorted colors....

Chosen Solution @refectio an iphone 6 i bought had no power or charge, i replaced the battery and charge port. the phone charges to 100% but on the amp meter it doesnt even hit 1 amp when charging it hits around 0.94 but drops and goes back up. when the charge is around 90 % the amps go up and down from 0 - 0.11 - 0.23 etc. could this be a problem with the phone or battery as it seems to drop the percentage to quickly like 5% in half an hour...

Chosen Solution I ripped the cable connecting the power button and volume buttons. What other way can I check that the phone turns on ? Try: connecting the two Power cables that were attached to the button, if not, then try giving each of the power cables a bit of a shock == (Be careful not to short your phone, DO NOT LEAVE THE CURRENT ON FOR MORE THAN about 1 SECOND) == Edit 02/02/17 This was an idea because the power button may be jammed and this just sounded like a reasonable answer because when you connect the wires the system gets the signal to start up so try do this see what happens but try it on an old phone...

Chosen Solution Hi, I am experiencing a weird issue on my PSP 2006 and I wonder if any one got an answer for that. I am trying my luck as I could not find such existing thread online (yet)! Basically, the PSP do not recognize batteries, which are proven to work on another PSPs, though PSP works when connected to wall socket. Well, in nutshell: PSP works while connected to power outlet PSP does not even start when on battery....

Chosen Solution Similar situation: new pump installed. Run any cycle and a small amount of water shoots in then the pump runs 10 + minutes until it codes out F2. Drain line is clear. Tied to pressure sensor? Pressure tube appears to enter back of washer. Can it clog? a_riddle1 you did not tell us if you replaced the pump for the same reason. With a normal F/02 error code for long drain you should get a “Sud” error after 4 minutes and then the F/02 error after 8 minutes....

Chosen Solution I am trying to fix the SuperAmp for the Turtle Beach PX24, headphone jack to be exact. I have a brown wire, a white wire, green wire and a silver wire in between them all. I am wondering which wire is connected to what. (Left/Right headphone, Ground, etc.) edit: I named the colors where the wires connect. technically that’s a picture of a headphone plug. Specifically it looks to be a 1/8 inch/3....

Chosen Solution I need replacement.. If you need a replacement part then I highly suggest you try to contact Razer’s online support to see if you can purchase a replacement. Other than that, an alternative would be to look on eBay, although from a quick glance all I can see are 2016 and 2014 fans. If it turns out to be impossible to find a 2012 fan, then it might be worth trying one of the latter model fan replacements, but it would be a bit of a stretch....

Chosen Solution Hey guys. I work in online retail in the returns. We’ve got back a few 1 x, and 1 x scorpios that refuse to power on. Most common is to here the chime, light comes on but light goes right back off and nothing happens. I have attempted to swap power supply’s once to no avail. Anything concrete I should know about? Hi Jermy! Someone else had the same issue as you: The power of my Xbox one x flashes then shuts off My guess was the power supply too....

Chosen Solution Currently working to replace my faulty mode dial switch, to do this I need to remove the top and front casing parts. Do I need to remove the hot shoe plate to be able to get these parts off? If so how do I set about doing this? Help would be greatly appreciated. Thanks @rlcrepairer, Rowan, Did do a good search for a service guide/manual with no luck. Below I posted a link to a like model that does have some partial disassembly guides that may help and a video(not English) showing the top being remove....

Chosen Solution I replaced the charging port on a Samsung Galaxy Note (sgh-i717m), charger works perfectly, however the microphone doesnt work. I did a little bit more research to determine the microphone is also part of the board that houses the micro usb charger. Could it just be a faulty part or, did i miss something? You’re absolutely right! Charging socket assembly also contains the main microphone, do a test by making a call and when the speaker mode on the other side should hear you....

Chosen Solution I had a customer bring me a Galaxy Mega i527 to fix the broken glass. I ordered the whole replacement screen, lcd, and midframe assembly. I got it all fixed and the display works fine but, the touch screen does not work at all. With the old screen, only the top portion of it works. Which is what it was doing to being with. Do you think I have a faulty screen?...

Chosen Solution I have a mid-2011 model 27" iMac and the LCD panel needs replacing. I purchased a replacement refurbished 27" LCD panel from a supplier in China which has the correct LG part number label on it , LM270WQ1 (SD) (E3), however, when it arrived it had no mounting frame/bracket attached to it, and when I tried to fit the replacement LCD into my existing 27" LCD mounting frame/bracket the replacement LCD panel is slightly to big to fit into it!...

Chosen Solution I have this same one and my charging port on the power board is broken.Im having a time finding the top power board.If u know where I can get one.Let me know. cobra562 seems like those boards are hard to come by. One option would be to try and find a broken (other than the charging port) Boom and harvest the part from that. Another option would be to replace the actual port....

Chosen Solution RFG237AARS/RFG237ACRSIce maker would occasionally just be out of ice for a day or two, but would always sort itself out. 2 days ago, no ice, and a quick quiet electric motor whirring noise repeating every 2 seconds coming from ice maker. Took out, the two cubes closest to the back of the fridge were frozen, the other 5 slots were empty. Defrosted it all, installed. Pushed Test/Reset button (fridge chimes, but nothing happens, ice maker doesnt cycle), killed power for 5 minutes, and back on, no error message....

Chosen Solution Hi! I have a Sanyo DP39E23 that I got from a family member. They gave it to me because it would work perfectly for a while and then the screen will go black with the audio still running. I looked into getting a different main board as that sounds to be a common problem, but I’m not sure if the board is even faulty. What should I do? Edit: The power supply makes an audible whine when the backlight goes out....

Chosen Solution Link to flicker video I got this Tab S as a refurb less than 30 days go. As soon as I got it, I wiped it and updated to most current Android available OTA. After 25 days or so I started to get a flicker where the screen turns off and on. Sometimes it drops out into the lock screen and it flickers from their instead of the home screen....

Chosen Solution Dropped kindle on screen and now it is black.i can hear it male noise when hitting the power button and volume but screen is black. I also have this problem. As I was trying to find solutions, I found that someone who had a Kindle Fire HD 2013 had this same problem. This is what they wrote: ‘‘I had this problem and just fixed it in a way you won’t believe ....

Chosen Solution Screen starts to come on, can see Dell for about a 1/2 second, then nothing ?? Can hear it start up, but the screen is blank, so not sure of anything else. Try a power reset: Unplug Laptop, remove battery and ram/ Press the power button for 10 seconds then install ram, install battery and try to power it up. “Make sure while installing your ram, that it is properly seated”....

Chosen Solution Hi! I have a 2010 27” iMac and every time I turn it on it flashes the screen and stays black.I can access it through a network using screen share and I can use its camera.I can see its desktop and use it normally but from another macbook. But the screen of this iMac doesn’t show anything. What might be the problem? is There anything I can do it before take it to assistance?...