Chosen Solution Hi everyone, I have a late 2013 retina macbook pro 13. Last month my wife dropped a bit of water on it. I took it to a local mac technician and he checked it out. All seemed fine but he told me he was going to clean he inside. After he did, my screen seems stained. I don’t know if the cleaner went inside the screen, if the inverter got damaged or if the display went bad in another way....
Chosen Solution So here is the story: I repair rrod xbox consoles so my friend thought he would buy a cheap 360s on ebay (warranty seal broken) that was broken and have me fix it. The problem is that when i try to power on the xbox it chimes, turns off, and the light on the brick is red. The power brick powers up the halo reach 360s that i own so the problem is not the psu....
Chosen Solution Dell XPS 15 9560 that came with the 56Wh Battery and space for 2.5in Drive. Can I upgrade this to the 97Wh Battery and remove the drive cage? Will it fit It will work, but you will not be able to install a 2.5” drive without downgrading the battery again. What this essentially means is you’re trading out having the option of a 256GB boot SSD+cheap mass storage for a lot of battery and needing to buy a large SSD at significantly higher cost....
Chosen Solution I have the first generation video ipod and have recently replaced the screen so I am moderately capable. But now need to replace the headphone jack, and figured while I’m in there might as well replace the battery, hard drive and body (I broke the clips and it is now help together with tape). I really like the 6th generation body, is it possible to attach my logic board and screen to 6th generation frame, then put that into a slim 6th generation body?...
Chosen Solution The screen goes blank when the power supply is plugged in, but it works fine when it’s just working on battery power. I have already rebooted the computer but the same thing happens. If your Acer Aspire laptop is showing only a black screen, see the Acer Aspire 5253 Has Display Problems problem page for possible causes and solutions. With your computer unplugged, right-click Start –> Power Options –> Choose when to turn off the display....
Chosen Solution I bought the 2013 27" iMac with a 256gb SSD. This is way too small. I have tried attaching a usb 3 drive but it causes problems or inconvenience when I am working with FCP due to the size of the projects. I understand that this mac uses PCIe connectors. My idea is to leave the current SSD and add a second SSD in the SATA connector. Does that sound feasible ?...
Chosen Solution When I turn on my Fierce, it boots up, gets past the alcatel fierce screen, gets to the METROPCS screen, and freezes. letting the battery drain and charging it again does nothing, restarting it doesn’t help, and i cant factory reset it. Any fixes to this, that i can do at home? Hi, Don’t know if this will work but try and start the phone in safe mode. I realize that the phone is not technically ON per se, but I’am hoping that if you follow the directions of holding the Power button to shut down the phone that by holding the Power OFF menu option it will then restart in safe mode....
Chosen Solution my ford f150 ranger the radiator fan pushed the air out »its 30l >the fan which we found in it >its for 40 l >i want the resolve If the fan is electric then you just have to reverse the wires going to it. If it’s mechanical, then you’ll have to remove the fan assembly again, unbolt the fan, flip the fan over and rebolt the whole assembly back into the truck....
Chosen Solution Hi I dropped the phone a while ago and it would not come on at all I tried a display and battery from known working iPhone 5. Took the the phone to a phone shop guy was fantastic he said be careful next time i managed to solder it to work if you drop it again it may damage it again and i may not be able to solder it....
Chosen Solution Does anyone know of a repair company for the Draeger JM-103 Jaundice Bilirubin meter? @mrozem that really depends on where you are located. Most BioMed companies should repair those meters. I suggest that you contact Draeger first at +1 866-343-2273 and if you get no help there, focus on the BioMed groups. Something like this one and see what they tell you. You could also try and see if your local healthcare facility has a BioMed department and speak with them....
Chosen Solution Hey. I’m looking for a supplier and was wondering if it was good. Thanks @rushfulmanny look around you ;>) This is iFixit territory and even so they may not have all the parts they will most likely have what you need. Their parts are made to specification and tested individually for quality assurance. iFixit offers an outstanding warranty and outstanding customer service to ensure that you are satisfied with your purchase....
Chosen Solution I dropped my phone and the vibrator stopped working. I’d like to know how can i open the back cover and replace the vibrator motor i have found a teardown here: ASUS Zenfone 3 ZE552KL Teardown hopefully this helps
Chosen Solution hi all, a few days ago my S6 completely died - I had left it charging (i think it ran out of battery completely so was charging whilst off). I think it got to about 80% full (as I remember seeing the image of a battery with plenty of green in it), but next thing I knew, no matter what I tried, it wouldn’t turn on. I could not get a reaction at all....
Chosen Solution I’m trying to fix a PS4 Pro that I picked up recently which had a bad power supply from roaches. I bought a replacement power supply, tore everything down and gave it a really good cleaning. After getting it mostly back together, I pressed the power button, and everything looked good. The light came on and the fan started spinning. At that point, I realized that in my eagerness to test it out, I hadn’t yet installed the HDD....
Chosen Solution I replaced the back housing of my iPhone 7, after reassembly the phone showed the dead battery indicator on the screen. I plugged the phone in and it began charging. While charging the screen randomly stopped responding to button clicks and it does not respond to inserting the charger. Really stumped here because it was working and now it’s not. Any help appreciated. Hello there, the most common cause of such a malfunction is human - you have probably broken the signal tape (microscale) of the screen....
Chosen Solution I’ve replaced the left analogue stick potentiometer, but in doing so have damaged the transistor that’s soldered nearby on pins U11 and C37. I tried a replacement transistor, but the controller inputs seem to be cutting out (pressing and holding a button results in the system believing it’s a rapid tapping). Does anyone know the correct spec part for replacing this transistor? It’s on the back of the main board, next to the pins for the left stick potentiometer (circled in blue)....
Chosen Solution Hi good day every one. I have a Drum pad(native instrument maschine ) Which has several rotary encoders in it. However these rotary encoders are spinning on their own( autoautomatically changes the value) I dismantled the device and found there are some white resdue near the rotary encoder pins on the pcb. My questions are as below. Does the white agent in the pcb causes the problem? If yes how to clean it?...
Chosen Solution Samsung Galaxy S20 5G G980 I have replaced new screen service pack but display is not showing. But my broken S20 phone is Samsung Galaxy S20 5G G981 both can have same new display ? both have different display LCD you can’t use different variant LCD.
Chosen Solution Whilst watching TV there was a loud bang/popping noise and the screen went black, however the sound carried on. The TV turns on/off still, remote works, but no picture. I took the back off to have a look, and whilst I have 0 knowledge of TVs I think this area might be the culprit as it’s covered in some kinda funky stuff? I was hoping anyone who has knowledge of these things might be able to help me identify whether this is correct and if so would replacing the board likely fix the problem?...
Chosen Solution Trying to understand what is broken here, so I can replace the parts.. believe it says r200 where the part is burned. Any help is appreciated :) My card: http://oi67.tinypic.com/oqkbyo.jpg rx580 (same pcb): https://www.techpowerup.com/reviews/Sapp… yes its a resistor with r200 and mr200 written above it but finding the value and package size could be difficult That is fuse for +12V supply. If your fuse burn, you must check short circuit before u replace....
