Posts

Chosen Solution My 2011 27’’ iMac had a graphic card problem (vertical lines on the screen) I took the opportunity and upgraded the card from 1gb to 2gb. When I turn on the mac it start to boot and suddenly shuts off I can turn it back on again and it happens again and again. I tried to make NVRAM Reset and it didn’t help. I took out the power cord from the mac, waited few seconds, pressed the power button for 10 seconds, then, I pressed the power button and hold while putting back in the power cord and powered on the iMac....

Chosen Solution Hello, This question was asked before but nobody answered it so I am going to give it another try ;-) I ordered a replacement screen for my Late 2015 27”. My original screen is LM270QQ1-(SD)(B1) The replacement I received is LM270QQ1-(SD)(A2) The …A2 model is for the iMac 2014. Can anyone tell me if the panels are interchangeable? I know that there is a difference in the display gamut in the 2015 model and so I am concerned with compatibility....

Chosen Solution Coconut status just before attaching charging cable: When charger first plugged in after partial battery discharge: About 2 minutes after plugging in power cord: Computer randomly goes into hibernate whenever on battery or AC power. Replaced battery with one from iFixit, recalibration steps multiple timesReplaced MagSafe board with one from iFixitReset SMC dozens of times, with battery connected and with it disconnectedRan caffeinate, no change in behavior.Etrecheck shows no errors, CoconutBattery shows normal battery performancePower Saver parameters all set to “never"....

Chosen Solution Hey guys, I’m having the strangest issue with my personal XS max (to the point I replaced it). Ill give you as much background as I can incase anyone has any ideas. The phones a bit beat (cracked screen and a dent or two) but gave me no issues when suddenly I woke to my phone dead. Unable to charge it or even get the dead battery logo. Trying the normal nee cable etc to no prevail (I mean every trick and cable, cleaning etc) so I stuck it on my wireless charger and watched it immediately light up, charge, and turn on....

Chosen Solution I’m installing aftermarket radio on my 05 Pontiac grand am. It’s not powering up, I checked all the wire they all have power except the red ignition wire. I checked all the fuses they are good. Don’t know what else to do Hi @ashtonssss , Here’s a link to the radio wiring colours for your model vehicle. Scroll down the page to view the wire colours and the function of the wire....

Chosen Solution I was given a nuvi 2797lm GPS that some one had tried to replace battery in it the connector strip that connect the screen was torn can it be fixed and if so how much? @jimjrhougland “the connector strip that connect the screen” if you are referring to the flat ribbon cable that connects the LCD to the motherboard, then the answer is no. It will require a LCD replacement....

Chosen Solution Hi I have a iPhone 7 plus with a damaged screen, I wanted to replace the screen but the bottom two screws are stripped and won’t come out. I’ve tried a few different screw drivers and super glue but screws are still stuck and I think that I might of actually made it worse. Would it be possible to forecefully remove screen without damaging home button? Any help would be much appreciated...

Chosen Solution I replaced and calibrated my iPhone 4S’s battery. It easily accepts a full charge, but that full charge drops to under 50% overnight, apparently doing nothing. Can someone please lay out the potential energy-draining applications that might be the cause? Or can anyone suggest ANY other viable reason a new, calibrated iPhone battery cannot hold its charge while apparently doing nothing? Background app refresh can suck up your battery life....

Chosen Solution Hello please could you tell me where of if I can purchase a batter charger for my sons 6v Ride on Thomas The Tank Engine Track & Train Toy as the one we have isn’t working anymore ? Thanks Rebecca smith 07803841526 rebeccasmith0101@hotmail.co.uk http://www.hedstrom.co.uk/shop/spares/th… also trying to find a charger, but no luck so far

Chosen Solution My parking brake has gone out and ive decided to put a hydraulic in there instead but im not too sure where or how to mount it Casa The Tracer Main there is absolutely no easy way to do that. Reason for that is that your MX-5 is not setup for that because NHTSA requires that: Each vehicle shall be equipped with a parking brake system of a friction type with solely mechanical means to retain engagement....

Chosen Solution Is it possible to replace the MBA 2010 keyboard with the back-lit one from the new MBA that just went on sale? Thanks. It would probably fit, but your logic board will not have a socket or controls to power and control the backlight. we need to find out!! I am missing the backlight so much!! How can we fit backlight to it? Without control keys

Chosen Solution how to reset Reset your Android tablet to factory defaults using a microSD ? Reset to OS Acer iconia B1 710 Use the volume down button to highlight wipe factory reset, then press the power button. Use the volume down button to select yes and delete all user data, then press the power button. Highlight reboot system now, then press the power button.

Chosen Solution I’m fixing a family members Galaxy S4 after it has been dropped. The screen is left un-cracked and is displaying colors in vertical lines. The touch screen still seems responsive as it’s making noise when I swipe to unlock the phone. I’ve been told that it was dropped in a small puddle but the water damage indicators on both the phone and battery seem ok so I’m not sure if any water got into the device....

Chosen Solution Does anyone know how to replace the screen on the tegra note 7 I cracked mine. I just don’t know how to take the tablet apart. The tablet is held together with clips along the seem in the sides of the tablet. If you plan to open the device, be sure to remove the SD card, Flip Cover (or slot protector), stylus, and SIM card if applicable. To open the device, slide the end of a nail file or other slim object into the seem and work along the edges carefully....

Chosen Solution Sadly enough my friends ds top screen has turned green. The screws for changing the voltage on the screens are completely gone for some reason? could this be causing the issue? Will replacing the component possibly fix it? Hi! You should first try replacing that ribbon, as you said. I’m not sure however if they are easy to find or not (my 2 minutes on google trying to find a link for you came up with nothing, but you could still find something if you dig deeper)....

Chosen Solution I bought through the Free Market (sorry) a Soundlink Color, FCC ID A94415859, IC ID 3232A-415859. The problem is that the power connector has broken inside the box. There is no way to open it, because the screw requires a special key that only Bose technicians have. Can you tell me where to find it and the name of this type of key? Hey bud I did a bunch of research and found the size....

Chosen Solution I have model KDL-55EX500 SONY. Was watching a program when it made a scratchy sound for a second and shut down, no sound, no picture, will not turn on. I have read posts that say to switch out one of the PC boards inside the TV but how do I figure out which one to change and where would I get replacement boards, SONY or an aftermarket ?...

Chosen Solution The light came on one day year ago and stayed on since. Is this something can be done at home? Thank you. The light is on because there is a problem with the air bag system. When the air bag light is on the system is not working and will not deploy in the event of an accident. Take it to AutoZone and get a free computer read out tom find out what the problem is....

Chosen Solution I got a new printer from Epson Once I turned it on it asked me for a new ink. After installing the ink it doesn’t Initialized the printer. No setup up. Set up sheet says it will take seven minutes to prime the printer with the ink before the printer will. E fully functional. It has been over 30 minutes and there’s nothing going on. The printer does not let me setup up....

Chosen Solution So i recently updated my phone to ios11. Day or two after, my phone shut off then “turned on” by itself. Shows the logo , then goes off. Repetitively. Thought it was my battery so i got a new one and day after still doing same thing. I was able to get it into recovery mode but it did the same thing. Please. Help. See if this works, if you’ve done this just advise....